FRETS.NET

Todd Mylet's Discussions (19)

Search Forum

View

Discussions Replied To (15) Replies Latest Activity

"Allan, I don't think I would refinish the entire neck.  Even if you refin the neck,…"

Todd Mylet replied Feb 26, 2013 to Spraying lacquer over poly....?

 24 Feb 26, 2013
Reply by Todd Mylet

"There are several finishes you need to do UV finishing.  They all used to be supplie…"

Todd Mylet replied Sep 19, 2011 to UV Cured Lacquer

 1 Sep 19, 2011
Reply by Todd Mylet

"I start all my nut slots with the same nut slotting file I'm going to use to cut the…"

Todd Mylet replied Aug 4, 2011 to Cutting nut slots accurately

 24 Aug 6, 2011
Reply by Mark Pollock

"I just tape over the inlay.  Before taping I stain the headstock in the area of the…"

Todd Mylet replied Apr 20, 2011 to Inlay Lacquer Scraping Tools? Post Pics!

 19 Jul 27, 2013
Reply by Stephen Fels

"Jeff, I would probably choose none of those options. You want something that isn't g…"

Todd Mylet replied Nov 30, 2010 to What to use to fill cracks in a newer Martin 00016-GTE?

 35 Dec 3, 2010
Reply by Mark Wallace

"I have to agree with Jim on this one, these guitars can be reset just like any dovet…"

Todd Mylet replied Nov 19, 2010 to Yamaha FG-180 Neck Question

 24 Dec 8, 2010
Reply by Greg Maxwell

"We convert old Gibsons like this in my shop from time to time and I do think they so…"

Todd Mylet replied Jul 7, 2010 to Should I replace the adjustable bridge on my 1966 Gibson J-50?

 25 Jul 28, 2013
Reply by Robbie Collins

"I get my poly finish from Lawrence McFadden's, just like my nitro lacquer. I'd like…"

Todd Mylet replied Mar 3, 2010 to What to use for an Acrylic / Poly finish?

 21 Oct 24, 2012
Reply by Dave Yelverton

"I think there are many good reasons to use poly finishes, both polyester and polyure…"

Todd Mylet replied Feb 28, 2010 to What to use for an Acrylic / Poly finish?

 21 Oct 24, 2012
Reply by Dave Yelverton

"I would guess this is a pretty good tool but I like to do all the thicknessing you m…"

Todd Mylet replied Feb 13, 2010 to Opinions about sanding station

 15 Feb 15, 2010
Reply by Grahame Myers

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service