FRETS.NET

Robert May's Discussions (69)

Discussions Replied To (68) Replies Latest Activity

"Oh ok. Missed that part about it being leveled while sticking up."

Robert May replied Aug 28, 2013 to Replace single fret?

9 Aug 28, 2013
Reply by Robert May

"I'd probably pull it, crimp the tang a little (this will flatten the frets radius a…"

Robert May replied Aug 28, 2013 to Replace single fret?

9 Aug 28, 2013
Reply by Robert May

"Crap ! They left out the "car chase scene" (that's the part where the frets are inst…"

Robert May replied Aug 27, 2013 to Building a perfect guitar on CBS news

8 Aug 30, 2013
Reply by Allen L Wall

"The best is if the customers tell their story, online, etc. If you say it, the guy c…"

Robert May replied Aug 26, 2013 to Horrible quality work - proper response

11 Aug 26, 2013
Reply by Robert May

"Ebay : rubber neck dumping ground."

Robert May replied Aug 10, 2013 to Such A Deal.....

15 Aug 12, 2013
Reply by Richard Bales

"I really do not need any more nephews !"

Robert May replied Aug 9, 2013 to Concave Ebony Fingerboard

13 Aug 9, 2013
Reply by Robbie Collins

"Stamped on Friday the 13th. Be careful ! hahaha"

Robert May replied May 9, 2013 to '66 Strat fretting question....

13 May 9, 2013
Reply by Mark Pollock

"Your saw is full length ?  There's a reason some guys use a very short blade to deep…"

Robert May replied Apr 18, 2013 to Loose frets after a refret

10 Apr 19, 2013
Reply by Robbie Collins

"HDPE plastic works just about as good as teflon. I cut strips of it from plastic gal…"

Robert May replied Apr 8, 2013 to Pulling frets created a mess on an ebony fingerboard!

8 Apr 9, 2013
Reply by Paul Verticchio

"I have a peterson vs-2. If I could go back in time, I'd get a sonic research turbo t…"

Robert May replied Mar 28, 2013 to What kind of tuner should I have

30 Apr 19, 2013
Reply by Robbie Collins

RSS

© 2021   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service