FRETS.NET

Ron Frazier's Discussions (325)

Search Forum

View

Discussions Replied To (321) Replies Latest Activity

"If it is just one fret you could try hammering just the end down hard. I would clamp…"

Ron Frazier replied Feb 13, 2009 to string going under fret

 8 Feb 15, 2009
Reply by bruce

"Try welding sticks of silver sodder. It is flat and can be hammered rolled or filed…"

Ron Frazier replied Feb 13, 2009 to where to get bar fret wire

 11 Feb 16, 2009
Reply by Frank Ford

"The old Fender amps had a two pronge cord that pluged in the wall .. We never knew w…"

Ron Frazier replied Feb 13, 2009 to hum active electronics ?

 15 Feb 16, 2009
Reply by Ned Knepp

"With the strings off I tap with my finger hard over each brace and you can hear if o…"

Ron Frazier replied Feb 13, 2009 to Martin D25K "aging" and neck angle

 28 Mar 7, 2009
Reply by Rob Mercure

"I stand to be corrected some what. I went to my shop and dug out a handful of old p…"

Ron Frazier replied Feb 13, 2009 to Shipping Celluloid

 10 Feb 13, 2009
Reply by Ron Frazier

"You havent told us much about the problem. I assume you mean the string is hooking t…"

Ron Frazier replied Feb 13, 2009 to string going under fret

 8 Feb 15, 2009
Reply by bruce

"You cant buy celluloid picks or binding or pick guards. I don't know when it was las…"

Ron Frazier replied Feb 12, 2009 to Shipping Celluloid

 10 Feb 13, 2009
Reply by Ron Frazier

"Check the first fret. Is the strings to high there? Ron"

Ron Frazier replied Feb 11, 2009 to Martin D25K "aging" and neck angle

 28 Mar 7, 2009
Reply by Rob Mercure

"It must be a plastic and nothing is going to disolve it. You might use the scrape or…"

Ron Frazier replied Feb 11, 2009 to cleaning off old adhesive

 3 Feb 11, 2009
Reply by Ron Frazier

"It is a lot easier to build them flat. Martin guitar tops are flat. Need I say mor…"

Ron Frazier replied Feb 11, 2009 to Flat top or Radiused top?

 9 Feb 14, 2009
Reply by gordon

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service