FRETS.NET

I found this site and thought it would be a good opportunity to share my device with you all.

 

I have invented a kit that alleviated myself from drilling holes in the deck of my Gibson ES-335 dot series guitar, in conjunction with a Bigsby B3 vibrato bar. This challenge presented itself when I was up against the option to install the Bigsby B7 vibrato bar.


During the development of my kit, I discovered the kit has the option of variable string tensions per the height adjustment of the studs. Thus revealing another option to CANT the kit, allowing it to rest evenly over the guitar strings, given that the strings are of different thicknesses. The third revelation in the development of my kit, I found the kit improved my guitar tone and tuning stability.


This kit can fit any Gibson guitar because the tailpiece hardware is the same in all of Gibson and Gibson-like electric guitars. The kit mounts in place of of the stop tailpiece with the existing studs & holes. Rested over the strings, and applying the necessary down tension needed per the height adjustment of the studs.


This kit can be adjusted to whatever height you want and or need to accommodate the action of your strings & bridge height. The CANT, per the adjustment of the studs, provides an even amount of down tension over the strings.

 

Visit the site Towner USA

Tags: b3, b60, bigsby, gibson, kit, retrofit, towner, vibrato

Views: 200

Attachments:

Reply to This

Replies to This Discussion

Do you hapen to have a photo of this unit???
Don, Visit the site Towner USA

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service