Forum Discussions (4,417)
| Discussions | Replies | Latest Activity |
|---|---|---|
Interesting table projectI'm not sure what we might use this for, but it looks useful in some way... http://makezine.com/projects/make-42/boat-hitch-table/?utm_med… Started by Mark Pollock in Luthier Talk |
2 |
Dec 11, 2014 Reply by nathan clark |
Carbon fiber top platesI am primarily a boat builder and cruisers are my primary clientele. I have been thinking of making a carbon fiber guitar ( back,sides,n… Started by Peter Laine in Luthier Talk |
10 |
Dec 9, 2014 Reply by Peter Laine |
1930's Gibson L00 has elevated fretboard ?Hi Guys , I have an old L00 in for work , including a neck reset.This guitar has had a lot of poor repair work , and the fretboard is eleva… Started by Len Biglin in Luthier Talk |
12 |
Dec 4, 2014 Reply by Paul Hostetter |
Fixing a Baby TaylorHello, I have a chance to buy a Taylor Baby guitar for cheap. Problem is, the top has separated from the body (see pics). Is this an expens… Started by Arthur Sweeney in Luthier Talk |
13 |
Dec 4, 2014 Reply by Rachel woodruff |
GS MiniGS Mini (acoustic only). High E string much more predominant than the others. Almost sounds like a resonator. Tried three different brands… Started by ken roberts in Luthier Talk |
9 |
Dec 3, 2014 Reply by Hesh Breakstone |
Bench Clamps L Clamps Are these for sale?I have seen Frank's tutorial on fixing distended sides and I have my own project with these problems. I am looking to buy some of the bench… Started by Matt Haugen in Luthier Talk |
8 |
Dec 2, 2014 Reply by Ned Knepp |
Armstrong handmade PAF vs. Seymour Duncan PAF.I recently acquired a Steve Andersen Vanguard Archtop (No. 366--2003). An earlier owner installed a Seymour Duncan Humbucker w/gold cover… Started by LARRY KLOSE in Luthier Talk |
8 |
Dec 1, 2014 Reply by Paul Verticchio |
Tips and tricks for lining up cracks.I have a Larrivee on the bench right now that was dropped against a stool. There are a number of bad cracks in the back that I need to fix,… Started by Ian Pender in Luthier Talk |
7 |
Dec 1, 2014 Reply by Ian Pender |
Sunburst Repair Help!Can anyone guide me in the right direction on fixing this eyesore? I understand without refinishing the whole top it will always be visible… Started by Kurt R in Luthier Talk |
5 |
Dec 1, 2014 Reply by Kurt R |
Some advice on glues for a large break?Ok, i'm a hide glue and cianoacrylate guy. Use them all the time with the best results. But i think neither of these would make a good glue… Started by Mario Cardenas in Luthier Talk |
16 |
Nov 29, 2014 Reply by Mark Pollock |
© 2025 Created by Frank Ford.
Powered by
