Forum Discussions (4,417)
| Discussions | Replies | Latest Activity |
|---|---|---|
New Organization...After discussing Ov*tions on this forum and at the very same time the "low end line..." or Appl*use instruments on another forum AND having… Started by Hesh Breakstone in Luthier Talk |
18 |
Mar 29, 2013 Reply by Hesh Breakstone |
Bicycle guitarJust completed, an electric guitar that incorporates recycled bicycle parts. You would have to know something about Davis California to un… Started by harrison phipps in Luthier Talk |
9 |
Mar 29, 2013 Reply by John Cartwright |
Case for deep bodied 000I think this question has been discussed...Years ago, I built a 000 with 4-5/8" depth at the end block, and have had it in a gig bag. I'd l… Started by Dave Richard in Luthier Talk |
2 |
Mar 28, 2013 Reply by Dave Richard |
Rickenbacker Truss RodsHey folks, Just had a Rick Bass in the shop with both of the (double) truss rods not working. I took the nuts off and could actually pul… Started by Gregory Hites in Luthier Talk |
5 |
Mar 27, 2013 Reply by Gregory Hites |
Top cracks: advice neededThis is about an 1977 Ovation "Balladeer" (solid wood top & neck). A working horse that has spent most of it's musical life outdoors, a… Started by Bart van Weperen in Luthier Talk |
18 |
Mar 27, 2013 Reply by Steve Williams |
Parlor from junk partsHowdy from Sitka Alaska I have been lurking here for quite a while and figured it was about time to try a post. I am just finishing an inte… Started by Mike McConnell in Luthier Talk |
4 |
Mar 26, 2013 Reply by Mark Pollock |
MOP inlays questionHello again I have another guitar, an Ibanez Hummingbird replica from '70s. I want to replace these block inlays with real MOP. I… Started by Eugen C in Luthier Talk |
7 |
Mar 26, 2013 Reply by michael mcclain |
Paisley Tele with the top flaking off....Yet another question....Vintage paisley Tele with , of course , the top is flaking up badly...My idea.....LMI white glue under the big flak… Started by thefishinmusician in Luthier Talk |
5 |
Mar 25, 2013 Reply by Eric Steven Johansen |
Refinishing old parlor guitar neckHey everybody..was hoping to get some ideas for refinishing the neck on this old parlor.It previously had a very thick and bad looking refi… Started by John McDonald in Luthier Talk |
11 |
Mar 24, 2013 Reply by Ned Knepp |
Neck AlignmentHoping to get a little advice on this one. I'm at the point of resetting the neck on this old parlor guitar and am a little stumped by how… Started by John McDonald in Luthier Talk |
8 |
Mar 23, 2013 Reply by Eric Steven Johansen |
© 2025 Created by Frank Ford.
Powered by
