Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Interesting unusual find on a 1930s fretboard...I have never seen anything like this before and thought I would post it here for your perusal. I have had this axe for almost two months,… Started by Kerry Krishna in Luthier Talk |
25 |
Nov 28, 2010 Reply by Kerry Krishna |
Tuning mandolin tops and backsAny mandolin builders out there that have any advise on how to tune the tops and backs of mandolins? This is new to me having only built 3.… Started by Rodney Smith in Luthier Talk |
9 |
Nov 26, 2010 Reply by Ned Knepp |
Gibson A mandolin neck repairI've just bought a 1906 Gibson A that had been dropped by it's previous owner. The neck has broken off cleanly (see photo). The neck and… Started by Mike Keen in Luthier Talk |
2 |
Nov 24, 2010 Reply by Mike Keen |
Gobson J-45 ADJ slot angleI've got a Gobson J-45 ADJ that I'm to replace the original ADJ bridge. While looking at the original bridge that came to me already off t… Started by ianderson in Luthier Talk |
4 |
Nov 23, 2010 Reply by STGuitarworks |
home made Arbor fret PressHey gang, I just got bought an arbor press like the one i used while i was an apprentice at Rauen guitars. My question is, what is the best… Started by Alexander Allgood in Luthier Talk |
1 |
Nov 22, 2010 Reply by nick-p |
Correct neck projection height for a mandolin ?I have the back off of an old Italian mandolin for restoration and know the neck needs re-setting. Will slip the back to correct the neck a… Started by Paul Lupus in Luthier Talk |
16 |
Nov 22, 2010 Reply by Paul Lupus |
Double Membership Or Split PersonalityI just discovered that I am listed twice in the Members listing. Same name but different photo - but definitely a photo of mine. Either I… Started by Dan Pennington in Luthier Talk |
1 |
Nov 20, 2010 Reply by Frank Ford |
Sign maker's tapeDoes anyone have a good source for low tack sign maker's tape? Started by Greg Maxwell in Luthier Talk |
3 |
Nov 18, 2010 Reply by Greg Mirken |
Kate DesmondAnybody else getting invitations from Kate Desmond? She sends emails thru the Frets system. Says she saw my Frets profile and is very int… Started by Dan Pennington in Luthier Talk |
5 |
Nov 18, 2010 Reply by Steve Davison |
Alvarez Neck SetGreetings fret.netters, A customer brought me an Alvarez from the seventies wanting a refret. After looking it over, it's going to need… Started by Gregory Hites in Luthier Talk |
6 |
Nov 18, 2010 Reply by Jeffrey L. Suits |
© 2026 Created by Frank Ford.
Powered by
