Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Yamaha FG-180 Neck QuestionI have an FG-180 red label made in Japan. The neck needs reset on it. I have done some research and have read that there is a possibility… Started by Chris Brown in Luthier Talk |
24 |
Dec 8, 2010 Reply by Greg Maxwell |
SANDING SEALER PRIOR TO NITRO ???getting ready to spray my guitar with a nitrocellulose finish but the bare wood requires a sealer first. is it ok to use a sealer that desc… Started by nick-p in Luthier Talk |
16 |
Dec 8, 2010 Reply by FRANK |
Pre-War Unidentified Gibson AcousticGreetings! I just inherited a Pre-War Gibson that I believe is an L-00 or L-01, but am turning to the experts for opinions. Unfortunately,… Started by Aaron Grubbs in Luthier Talk |
6 |
Dec 8, 2010 Reply by John C. Murray |
SHELLAC EXPERTS ??????hi folks, been through the whole "should i use sand/sealer" argument recently and i'm left wanting to try SHELLAC but have had NO exper… Started by nick-p in Luthier Talk |
21 |
Dec 8, 2010 Reply by John C. Murray |
Bag of pre-made Cleats???Someone told me in one of the forums that you can buy a bag of pre-made cleats. Does anyone know where you can buy them? Started by Jeff Perkins in Luthier Talk |
5 |
Dec 8, 2010 Reply by John C. Murray |
What would you do?I made a perfect scarf joint,headstock.great alignment on the new mandola neck and then realized I had fouled up on my mahogany grain orien… Started by Tim Mace in Luthier Talk |
16 |
Dec 8, 2010 Reply by Tim Mace |
Gluing-in a bolt-on neckI'm in the process of building a Les Paul Style guitar. Although it was made to be a bolt-on neck guitar (like a Fender), I'm wondering if… Started by Richard Barbera in Luthier Talk |
8 |
Dec 8, 2010 Reply by Len Biglin |
Figured maple for a Weissenborn slide guitar-thoughts?Hi,I'm wondering if any folks on frets can help me out in articulating to a potential customer the likely sound qualities of a figured mapl… Started by Rory in Luthier Talk |
2 |
Dec 6, 2010 Reply by FRANK |
HAIRLINE LACQUER CRACKS,ON BACK OF AMERICAN STRAT NECK.DOES ANYONE HAVE SUGGESTIONS,HOW I CAN REMOVE,LACQUER CRACKS,LEFT-BY SLOPPY WORK DONE BY A GUITAR TECH,WHILE,DE-RADIUSING,THE FINGERBOARD.… Started by STAN BEDDOW in Luthier Talk |
2 |
Dec 6, 2010 Reply by Pierre-Antoine Roiron |
Pickguard StaticI've just completed a telecaster, and wired in a pair of brand new Lace Sensors. Bridge is standard, with standard ground wire run to the v… Started by Randall Curtis Bowman in Luthier Talk |
6 |
Dec 5, 2010 Reply by Brady Anderson |
© 2026 Created by Frank Ford.
Powered by
