Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
maple fretboard nickI have a guitar neck that is a mighty mite with a maple fingerboard. The red arrow is pointing to a nick in the fingerboard. What is the be… Started by Lee Gendvilas in Luthier Talk |
1 |
Aug 16, 2010 Reply by Paul Breen |
Firebird Banjo tunersDoes anybody know of tuners that will retro fit the crappy banjo tuners gibson likes to put on these? Started by Eclipse Wizard in Luthier Talk |
1 |
Aug 14, 2010 Reply by Pierre-Antoine Roiron |
Best Martin StringsHi gang - I know string selection is a personal preference. Since I am due for a new set of strings, I have read that Addario strings seem… Started by Rob in Luthier Talk |
23 |
Aug 13, 2010 Reply by Rob |
Question about Oscar Schmidt Stella finishHello I recently acquired an O.S. Stella Grand Concert guitar - circa late 1920's. Its quite structurally sound, however the major issue is… Started by Frank Capo in Luthier Talk |
4 |
Aug 13, 2010 Reply by Frank Capo |
Bridge removalI need to remove the bridge on a tenor ukulele. It was attached with titebond original. Any suggestions would be appreciated? Thank you… Started by John McDonald in Luthier Talk |
13 |
Aug 12, 2010 Reply by John McDonald |
Inlays becoming proud of fretboard?I have no idea what could be going on with this guitar. It is s 70s Fender plywood guitar with the snowflake inlays. There are no signs at… Started by Kerry Krishna in Luthier Talk |
5 |
Aug 12, 2010 Reply by Kerry Krishna |
Hand Rubbed Nitro FinishHello Hello!! What would be the best material to apply the lacquer? At the moment I'm using regular flannel and I'm getting alot of "fuzzie… Started by Eclipse Wizard in Luthier Talk |
4 |
Aug 11, 2010 Reply by Eclipse Wizard |
1927 Gibson A1 snake head - advice needed on color and refinishingGreetings from England. I've recently bought a 1927 blackface A1 (82390 in the Archive). It's very sound structurally, has a good voice and… Started by Mike Keen in Luthier Talk |
13 |
Aug 11, 2010 Reply by Mike Keen |
Rickenbacker bridgesAnyone out there know what metal was used in the individual saddles on Ricky electrics ?..My guess is aluminum, but I could and have been w… Started by thefishinmusician in Luthier Talk |
11 |
Aug 9, 2010 Reply by Pierre-Antoine Roiron |
Super Glue Solvent on Poly finishesHey guys, I was wondering if anyone knew the affects of a super glue solvent on polyester finishes? I use a product called super solvent ma… Started by Eclipse Wizard in Luthier Talk |
3 |
Aug 7, 2010 Reply by Eclipse Wizard |
© 2026 Created by Frank Ford.
Powered by
