Forum Discussions (4,417)
| Discussions | Replies | Latest Activity |
|---|---|---|
guild mark 2 face refinishhey folks I need your help again. I just removed a lifting bridge from an old Guild nylon sting mark2. unfortunately the bridge had came of… Started by vince sauter in Luthier Talk |
2 |
Apr 1, 2009 Reply by vince sauter |
Binding gap on 1990s GuildPatient is a Guild American, late 90s. Binding shrunk and popped off at waist on both sides. Removed to relieve stress and re-glued. I've g… Started by Christian Johnson in Luthier Talk |
3 |
Mar 30, 2009 Reply by Jim Bancroft |
Converting a backloading bridge to a pin bridgeThe patient looks to be a Harmony or Harmony knock off...It had a back loading bridge...( Like an Ovation )..The music store lost the origi… Started by thefishinmusician in Luthier Talk |
3 |
Mar 28, 2009 Reply by Frank Ford |
JLD Bridge Doctor on a laminate top?I have an early-70's Harmony, one of the few made with laminates (I guess I'm just lucky!) The top has bellied so much that the corners of… Started by Rick Homan in Luthier Talk |
3 |
Mar 28, 2009 Reply by Rick Homan |
Spruce Top Worry - Advice Appreciated.Hi, not a "worry" really, just an enquiry. I recently re-fitted an internal Fishman gooseneck microphone, as the previous fitting (Velcro t… Started by onemanband in Luthier Talk |
5 |
Mar 28, 2009 Reply by onemanband |
Eucalyptus, acaccia in BerkeleyHey, Living near enough to Berkeley to keep up a little with its politics, I noticed a bit about the eucalyptus removal. The first link is… Started by Doug T in Luthier Talk |
11 |
Mar 24, 2009 Reply by Russell Vance |
Belly topHi, everyone, I've a question to experts Gibson owners, How to determine the normal belly top on a guitar ? which's normal belly value ?… Started by brums in Luthier Talk |
8 |
Mar 23, 2009 Reply by Jim Bancroft |
Hand rubbed urethane finishHey everyone! A martin X-Seried came into the shop recently for some crack repair and needs some lacquer touch on it. I know from the marti… Started by Eclipse Wizard in Luthier Talk |
4 |
Mar 23, 2009 Reply by Eclipse Wizard |
HOW I DO IT unedited photo essay on building a Tedrow ConcertinaIf a picture is worth a thousand words, we will have quite a novel when I am done with this concertina. I am building a custom Tedrow Zephy… Started by Bob Tedrow in Luthier Talk |
2 |
Mar 22, 2009 Reply by William F.Eden |
Source for fret wire with wider tang widthI’m looking for a source for fret wire with a wider tangs to be used to straighten a mandolin neck with a slight bow. The neck has a nonadj… Started by Fletcher Brock in Luthier Talk |
4 |
Mar 21, 2009 Reply by Mike Kolb |
© 2025 Created by Frank Ford.
Powered by
