Forum Discussions (4,416)
| Discussions | Replies | Latest Activity |
|---|---|---|
Pumice and RottenstoneI am at the final stages of my first guitar. I am just waiting for the KTM-9 brushed on water-based lacquer to cure before buffing. The tro… Started by Doug Collins in Luthier Talk |
10 |
Nov 24, 2008 Reply by Doug Collins |
Any thoughts on this repair?I am not going to take this repair on. But wanted to post it before it leaves shop. It is a Johnny Smith in a bad way. Braces are butchered… Started by Mike Fleck in Luthier Talk |
0 | Nov 24, 2008 |
What to do about white stuff In "dry creek bed" checked finish?The photo tells the story. The back of the headstock looks the same, and there is a little of this on sides at the upper bout, and a spot o… Started by Rick Homan in Luthier Talk |
4 |
Nov 24, 2008 Reply by Rick Homan |
Adjusting 60's D18 neck reliefI have a 1965 D18 on the bench for the well-known 'Top bulge at the bass side of the bridge' problem, plus minor intonation tweaks and acti… Started by Alys and Simcha in Luthier Talk |
5 |
Nov 23, 2008 Reply by David Reilly |
Making Forms for Fox/Universal SidebenderWhen I make a new form for my sidebender, I undersize it by the thickness of the sides, and usually have to touch up the bends on a hot iro… Started by Larry Schultz in Luthier Talk |
5 |
Nov 22, 2008 Reply by Larry Schultz |
neck reset due to humidity?I moved to the North Coast of the Dominican Republic and brought guitars, amps. Humidity here is very high, about 90 percent, and it is hot… Started by ken in Luthier Talk |
0 | Nov 21, 2008 |
Shellac BlushI have found several effective ways of chasing blush out of lacquer finishes, but I am having the devil's own time of chasing the blush fro… Started by Carter Ruff in Luthier Talk |
4 |
Nov 21, 2008 Reply by Greg Mirken |
Learning To InlayI would like to start the long process of learning the fine art of inlay and engraving. I had some inlay work done by Larry Robinson and ev… Started by tdibell in Luthier Talk |
4 |
Nov 21, 2008 Reply by Jerry Mercer |
What repairs do you see most frequently?I'm a fixer, not a builder. I work for 2 music stores in the area... and I'd like to compare what types of repairs you most often see, part… Started by Mike Kolb in Luthier Talk |
6 |
Nov 20, 2008 Reply by mathieu thomas-guy |
Guitar LabelI've read a lot of books on guitar building, but I've never found anything on the application of the label. I've always printed one on the… Started by Jack Lord in Luthier Talk |
7 |
Nov 17, 2008 Reply by Neil |
© 2025 Created by Frank Ford.
Powered by
