Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Anyone using an Optivisor?Hi all. Thinking of spending some of my hard-earned on useful tools and stuff that I've had my eye on for a while. A few times while doing… Started by Keith Somerville in Luthier Talk |
20 |
Dec 9, 2018 Reply by Walter W Wright |
Wide, brown binding tapeHello All, I use the 3/4" wide, brown binding tape---wonderful stuff---for everything but gluing in bindings. For that it's long rubber ban… Started by Brian Burns in Luthier Talk |
0 | Dec 7, 2018 |
Turning away a customerHi, all. Hope everyone's busy on their benches. I've had an email exchange with someone I suspect is going to be one of those customers who… Started by Keith Somerville in Luthier Talk |
7 |
Dec 5, 2018 Reply by Keith Somerville |
Glue for OudHappy Holidays! I am unable to decide which glue to use - epoxy or CA? Started by Lee Gendvilas in Luthier Talk |
4 |
Dec 4, 2018 Reply by jbbancroft |
Removing low fretsthis has probably been done by others, but I never heard anyone talk about it and I discovered this on my own. How to remove frets that are… Started by jbbancroft in Luthier Talk |
8 |
Dec 3, 2018 Reply by Mike Cornwall |
GluBoost Super glue tintsHey all. Im browsing LMII at the moment and just came across this line of cyanoacrylate glues, ca glues for finishes, and tints for said gl… Started by Andrew in Luthier Talk |
12 |
Nov 30, 2018 Reply by Mark A. Kane |
modifying "nice" guitarsI have a 2008 circa martin " custom built "guitar ( about $ 4000 USD ) I live in Trinidad & Tobago and play a lot , the binding is sh… Started by Peter Laine in Luthier Talk |
2 |
Nov 29, 2018 Reply by Paul Verticchio |
I Need help with regluing a snapped-off headstockHello. I reglued a snapped off headstock with titebond recently. It was previously glued but appeared disjointed and i pulled it apart. It… Started by Frank Capo in Luthier Talk |
42 |
Nov 29, 2018 Reply by Terry Chapman |
acoustic guitar neck finish optionsHi, I recently used an automotive acrylic clear over a bare timber acoustic neck. I sprayed the neck about 2 weeks ago and it is stil… Started by Paul Said in Luthier Talk |
2 |
Nov 26, 2018 Reply by Greg Mirken |
Loose National Guitar seamAnyone repair one of these? Can this be soldered easily without causing heat damage. Another idea is JB weld and a clamping caul. anyone h… Started by jbbancroft in Luthier Talk |
9 |
Nov 15, 2018 Reply by jbbancroft |
© 2026 Created by Frank Ford.
Powered by
