Forum Discussions (4,417)
| Discussions | Replies | Latest Activity |
|---|---|---|
Fender Palomino "Broomstick" removal?I have a Fender Palomino in my shop that the top has caved in under the saddles and has cracked/ broken out the top and bridge plate. The b… Started by Matt Dreher in Luthier Talk |
14 |
Nov 22, 2019 Reply by steve carmody |
CA Glue on FinishI got a little CA glue on neck just below the fretboard. What’s the best way, if any, to remove it? Thanks, Mark Started by Mark Ballard in Luthier Talk |
5 |
Nov 18, 2019 Reply by Mark Ballard |
Got the Holiday 'Wish List' started yet?If I were 20yrs old, just starting out and had some ""crazy money" to burn for a full set of these diamond nut files, they'd probably be at… Started by Mike Kolb in Luthier Talk |
2 |
Nov 14, 2019 Reply by Paul Eisenbrey |
Taylor Neck Reset - Stacking Shims?Hello All, I'm working on a Taylor Baby with really high action. There is only one shim on these models under the fretboard tongue (there… Started by Chris Shaltis in Luthier Talk |
10 |
Nov 13, 2019 Reply by Chris Shaltis |
33 Martin 0-17Hi guys , I have 1933 Martin 0-17 on the bench , the owner has just bought it . It seems to have been sprayed with a satin lacquer which sh… Started by Len Biglin in Luthier Talk |
5 |
Nov 12, 2019 Reply by Len Biglin |
What is it?Saw this at our classic all purpose music store, the Folk Shop in Tucson. They’ve had this for a while and it has no label or logo. Clearly… Started by LARRY KLOSE in Luthier Talk |
7 |
Nov 11, 2019 Reply by Todd Reich |
Need bridge thickness for 76 Gibson J-45/50I have acquired a 76 Gibson J-45/50 that I suspect has had the bridge thinned to get the action lower on a guitar that needs a neck re-set.… Started by Paul Breen in Luthier Talk |
3 |
Nov 9, 2019 Reply by Richard Bales |
Brace radius jigMade a jig to give brace blanks a small radius, 30" for the top braces and 20" for the bottom ones, using a toggle clamp, a long plane and… Started by Roger Häggström in Luthier Talk |
4 |
Nov 1, 2019 Reply by Redacted |
The mummified guitar..Well this was what I found when I needed to replace a couple of potentiometers in the old Guild.. Sorry here is the picture :) It's to keep… Started by Claus Holm Jensen in Luthier Talk |
1 |
Oct 28, 2019 Reply by LARRY KLOSE |
shelf-nut on les paulmaking a shelf nut. by the time it's correct, the shelf for the chubby E string will protrude 3mm from the original nut position. is this a… Started by Nick - p in Luthier Talk |
4 |
Oct 28, 2019 Reply by Todd Reich |
© 2025 Created by Frank Ford.
Powered by
