Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Aloha guitars/lapsI am putting together a feature page http://www.jedistar.com/aloha.htm on Aloha brand which was made in Hawaii in early 1900s and from 1935… Started by jedistar |
0 | May 13, 2009 |
Do Gibson Glue their Frets?Hi, I was wondering whether anybody could clarify something for me. Does anybody know if Gibson use glue whilst fretting these days. I only… Started by Darren |
4 |
May 13, 2009 Reply by Len Biglin |
Kay with adjuster in neck heel.Hi guys I tried this a week ago and didn't get a bight. It's a Kay Barney Kessel and in the heel cap it has a deep hole with a threaded rod… Started by Len Biglin |
2 |
May 13, 2009 Reply by Len Biglin |
Bracing patternHi, I’m just starting to build a Matrin “0" I guess it’s a Parlor guitar. I need a photo or drawing of the bracing pattern. There seems to… Started by Robert Freemond |
6 |
May 11, 2009 Reply by Robert Freemond |
Best Pick For Solid State AmpAccording to the good friends over on letstalkguild.com for my D-35 Guild with a LRBaggs in the slot pick-up wire I should be leaning towar… Started by Rob |
8 |
May 10, 2009 Reply by Rob Mercure |
Help requested for a poly finish!I have a Guild GAD 50 with a poly finish. After repairing breaks and cracks, it needs the entire top refinished to achieve a decent finish.… Started by Jerry Ryan |
4 |
May 9, 2009 Reply by Jerry Ryan |
Graph tech saddles in conductive plastic?Hi again, has anyone heard of conductive graphtech , I saw a brief rave on a website but it sounded a bit uninformed. Thanks Len Started by Len Biglin |
3 |
May 9, 2009 Reply by Rob Mercure |
Truss Rod Effect on "Action"I've known there's a common but mistaken belief that the truss rod exists to raise or lower the "action" at the 12th fret rather than just… Started by Brent Hutto |
2 |
May 9, 2009 Reply by Brent Hutto |
the impossible neck resetin Franks articlel on doing a neck reset with a "bolt on", http://www.frets.com/FRETSPages/Luthier/Technique/Guitar/NeckReset/BCRIchReset/b… Started by fred huang |
5 |
May 9, 2009 Reply by Frank Ford |
How to release cam clamp?Ok, this is clearly a newbie mistake. I have a cam clamp that I let slide all the way closed on itself. Now the jaws are shut and I can't g… Started by Dan Coplan |
3 |
May 8, 2009 Reply by Dan Coplan |
© 2024 Created by Frank Ford. Powered by