FRETS.NET

nathan clark's Discussions (251)

Search Forum

View

Discussions Replied To (239) Replies Latest Activity

"A non tapered shim at the bridge end of the neck pocket (mortise) is fine for cheap…"

nathan clark replied Feb 7, 2013 to Shimming Electric Bolt-On Necks?

 31 Jul 21, 2013
Reply by Paul Verticchio

"Sounds like a good process you have Hesh.  Sait, I'm not familiar with that paper, I…"

nathan clark replied Feb 2, 2013 to Fret work scratches....

 17 Feb 2, 2013
Reply by John

"Updating an old thread here.  I would up buying the small bronze lie-nielsen 101 vio…"

nathan clark replied Feb 1, 2013 to Palm Plane

 8 Feb 1, 2013
Reply by nathan clark

"I'm talking about the stew mac off set diamond files.  Each file has 2 sides: one fo…"

nathan clark replied Feb 1, 2013 to Fret work scratches....

 17 Feb 2, 2013
Reply by John

"When I use the 150 diamond file I stop short of creating a skinny plateau at the top…"

nathan clark replied Feb 1, 2013 to Fret work scratches....

 17 Feb 2, 2013
Reply by John

"I start with 600 grit (400 is also fine), but I do half of the sanding with the sand…"

nathan clark replied Jan 31, 2013 to Fret work scratches....

 17 Feb 2, 2013
Reply by John

"I would go 30's Gibson L-00!  I suppose you're going to have to modify whatever patt…"

nathan clark replied Jan 31, 2013 to Who made this guitar? Re-Brace thoughts?

 23 Feb 5, 2013
Reply by Mark Pollock

"That's a tough gig you have, I know because I had a similar job early-on in my caree…"

nathan clark replied Jan 28, 2013 to Music Store Bosses...

 6 Jan 28, 2013
Reply by William F.Eden

"1941 L-00: 1st string is 24 7/8" and 6th string is 25""

nathan clark replied Jan 26, 2013 to Exact measurements of Gibson 24-3/4" scale

 18 Jan 26, 2013
Reply by nathan clark

"I would also suggest installing a couple of huge windows on your North-facing wall,…"

nathan clark replied Jan 26, 2013 to New shop space!! What to do?

 12 Jan 28, 2013
Reply by Mark A. Kane

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service