FRETS.NET

John's Discussions (337)

Discussions Replied To (309) Replies Latest Activity

"I'd like that fret bender better if it had an unbend option for putting rolled fret…"

John replied May 1, 2013 to a couple of lil' things....

10 May 1, 2013
Reply by Mark A. Kane

"I had a rather extreme case of this on a Gretsch Synchromatic 400 I think. On the to…"

John replied Apr 26, 2013 to srinking side binding on a 1935 Epiphone guitar

7 Apr 28, 2013
Reply by David Collins

" In hindsight the caveat should have been - Before you can comment you have to build…"

John replied Apr 24, 2013 to Humidity.....What did Stradivarius do?

19 May 17, 2013
Reply by Peter Poyser

"The video gives a good explanation of it's usefulness without a hygrometer and even…"

John replied Apr 24, 2013 to Humidity.....What did Stradivarius do?

19 May 17, 2013
Reply by Peter Poyser

"The builder that posted this has been a die hard wet bulb guy for years, he feels th…"

John replied Apr 24, 2013 to Humidity.....What did Stradivarius do?

19 May 17, 2013
Reply by Peter Poyser

"Here's a howto http://www.youtube.com/user/OBrienGuitars?hl=en-GB&gl=CA&clie…"

John replied Apr 24, 2013 to Humidity.....What did Stradivarius do?

19 May 17, 2013
Reply by Peter Poyser

"I meant spline btw. We've just had several days of -20c at 7am and +5c at noon fortu…"

John replied Apr 10, 2013 to severe split in new acoustic

11 Apr 13, 2013
Reply by Hesh Breakstone

"This should be doable without taking the back off. If you can't get the crack togeth…"

John replied Apr 10, 2013 to Dropped guitar. Ouch

6 Apr 10, 2013
Reply by John

"Up here in Winnipeg it's extremely dry in the winters the 40 to 50% rule doesn't wor…"

John replied Apr 10, 2013 to severe split in new acoustic

11 Apr 13, 2013
Reply by Hesh Breakstone

"If you can repurpose a central vac system they're designed have pipe run to them and…"

John replied Apr 6, 2013 to dust control

7 Apr 19, 2013
Reply by Robbie Collins

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service