FRETS.NET

Tim Mace's Discussions (462)

Search Forum

View

Discussions Replied To (448) Replies Latest Activity

"I use fossilzed amber instead of glass...the kind they used to line the string guide…"

Tim Mace replied Jan 28, 2012 to Crystal Frets....

 16 Feb 1, 2012
Reply by Hesh Breakstone

"you must go thru the learning process so get some scrap material ,keep it moving and…"

Tim Mace replied Jan 28, 2012 to bending sheet or veneer ???? steam ?? heat ??

 7 Jan 28, 2012
Reply by William F.Eden

"Are these actual new fret dimensions or is it possible they've been redressed?Custom…"

Tim Mace replied Jan 28, 2012 to Frets to suit Takamine ?

 7 Jan 29, 2012
Reply by nathan clark

"I saw a mic that might work well on a mando.Bartlett fiddle mic puts out great sound…"

Tim Mace replied Jan 21, 2012 to HELP! Mandolin Pickups

 17 Jan 30, 2012
Reply by LARRY KLOSE

"ok ...last idea..if the pin hole/bridge plate are worn you could have a ballend ratt…"

Tim Mace replied Jan 20, 2012 to "dead note" on the second fret

 25 Jan 23, 2012
Reply by LARRY KLOSE

"Have you considered an exorcist?  "

Tim Mace replied Jan 20, 2012 to "dead note" on the second fret

 25 Jan 23, 2012
Reply by LARRY KLOSE

"Could it be at the nut if not enough dn/tension to a tuner..or a loose tuner?Too lar…"

Tim Mace replied Jan 19, 2012 to "dead note" on the second fret

 25 Jan 23, 2012
Reply by LARRY KLOSE

"That's the worst contrast(IMO) for a bridge I've ever seen.Is it Ivory or Maple?Stil…"

Tim Mace replied Jan 15, 2012 to Martin 21/2-40

 7 Jan 18, 2012
Reply by lonnie james barber

"Super glue + get new tuners and keep those forever somewhere else!"

Tim Mace replied Jan 15, 2012 to Any way to save this old tuning knob?

 11 Jan 17, 2012
Reply by John McDonald

"flattened a bowling ball then shaped it to look Gibbylike?  "

Tim Mace replied Jan 10, 2012 to anyone got any ideas of how they pulled off this one.

 7 Jan 11, 2012
Reply by Pierre-Antoine Roiron

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service