FRETS.NET

Jeff Highland's Discussions (324)

Search Forum

View

Discussions Replied To (319) Replies Latest Activity

"If you know what you are doing with it, Hot Hide glue would be best, not liquid hide…"

Jeff Highland replied Jun 16, 2011 to First broken headstock repair

 10 Aug 4, 2011
Reply by Grahame Myers

"And make sure you get the soundhole edge and rosette rings aligned before you lock a…"

Jeff Highland replied Jun 10, 2011 to Soundhole Crack Warped

 21 Jun 14, 2011
Reply by Jeff Perkins

"I'd be leaving the neck in place, It will help give leverage to realign the crack pl…"

Jeff Highland replied Jun 9, 2011 to Soundhole Crack Warped

 21 Jun 14, 2011
Reply by Jeff Perkins

"George , I'd be interested in taking this on to build a replica if you can't find a…"

Jeff Highland replied May 31, 2011 to HOWE - ORME neck in need of body

 20 Sep 19, 2012
Reply by Tim Mace

"Good luck Frank, hope it all goes to plan."

Jeff Highland replied May 30, 2011 to Your FRETS.NET Moderator will be off for a spell

 44 Jun 13, 2011
Reply by Claude Galinsky

"No need for extra support, I have an es126tdc which had a b3 which I replaced with a…"

Jeff Highland replied May 25, 2011 to Gibson 125 fitting a Bigsby and repairing it . .

 8 May 27, 2011
Reply by Pierre-Antoine Roiron

"I'll leave it to others to take this on, but fear of adjusting a truss rod is just a…"

Jeff Highland replied May 25, 2011 to Refurbishing a fret board . .questions on the correct methods?

 6 May 26, 2011
Reply by Pierre-Antoine Roiron

"A bigsby B7 is screwed to the face of the guitar as well as at the heel A B3 is more…"

Jeff Highland replied May 25, 2011 to Gibson 125 fitting a Bigsby and repairing it . .

 8 May 27, 2011
Reply by Pierre-Antoine Roiron

"There's an italian luthier Frudua who has a very comprehensive seies of youtube vide…"

Jeff Highland replied May 25, 2011 to Van Halen vibrato setup

 4 May 27, 2011
Reply by Alexander López

"I'd disagree with you on this Mark, I like to have my necks setup with minimal relie…"

Jeff Highland replied May 25, 2011 to Refurbishing a fret board . .questions on the correct methods?

 6 May 26, 2011
Reply by Pierre-Antoine Roiron

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service