FRETS.NET

Tim Mace's Discussions (462)

Search Forum

View

Discussions Replied To (448) Replies Latest Activity

"Speedy recovery vibes going out to ya,Frank!!"

Tim Mace replied May 30, 2011 to Your FRETS.NET Moderator will be off for a spell

 44 Jun 13, 2011
Reply by Claude Galinsky

"There's the best place to work at the factory...C/A spray booth...hazmat city...  "

Tim Mace replied May 30, 2011 to Taylor Clear Pickguard Installed on Nitro Finish

 11 Jun 2, 2011
Reply by Will Travnikar

"...except damned if that one don't look handcarved??been there done that...Elderly,L…"

Tim Mace replied May 30, 2011 to What and Where?

 4 May 30, 2011
Reply by Tim Mace

"You could make your own solid (no kerf) strips out of mahog.or other wood.I did it o…"

Tim Mace replied May 28, 2011 to SEAGULL 12 STRING - BRIDGE CRACKED & TOP CAVING IN

 19 May 28, 2011
Reply by Mark Softich

"go on Grahame and make that top...unless you've got some youth serum.How will you de…"

Tim Mace replied May 26, 2011 to SEAGULL 12 STRING - BRIDGE CRACKED & TOP CAVING IN

 19 May 28, 2011
Reply by Mark Softich

"Don,Surely you've heard of CF Martin?? blahahahahah"

Tim Mace replied May 26, 2011 to Another question?

 14 May 28, 2011
Reply by Doug T

" I have no experience w/CF but have just talked to someone over the weekend who is d…"

Tim Mace replied May 26, 2011 to Another question?

 14 May 28, 2011
Reply by Doug T

"I believe you and have done this 30 yrs ago but got tired of explaining the concept.…"

Tim Mace replied May 25, 2011 to stringing a classical guitar

 9 May 29, 2011
Reply by Mark Pollock

"If such a problem exists as Pierre states then this could be corrected by directing(…"

Tim Mace replied May 25, 2011 to stringing a classical guitar

 9 May 29, 2011
Reply by Mark Pollock

"A hard knock would be my guess.Under tension .."

Tim Mace replied May 24, 2011 to Mending an upper bout crack in a 1960s Gibson LG1

 4 May 24, 2011
Reply by Tim Mace

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service