FRETS.NET

John's Discussions (337)

Search Forum

View

Discussions Replied To (309) Replies Latest Activity

"Brian this is just my opinion 1. Ethically it's your job to provide accurate informa…"

John replied May 3, 2012 to Ethics discussion: when to turn away work

 24 May 15, 2014
Reply by Ron frazier

"I use this tool for filling machine head screw holeshttp://www.leevalley.com/en/gard…"

John replied Apr 27, 2012 to telescoping brass tubing plug cutters

 16 May 15, 2014
Reply by Ron frazier

"What are you using this for? I have several sizes and 3 different types of plug cutt…"

John replied Apr 26, 2012 to telescoping brass tubing plug cutters

 16 May 15, 2014
Reply by Ron frazier

"There are some great suggestions here. Thank you. I will post a picture of the side…"

John replied Apr 24, 2012 to Looking for better end nippers

 16 Apr 24, 2012
Reply by Paul Verticchio

"Here's a repair where I glued back everything that came out, that meant carefully cu…"

John replied Apr 17, 2012 to Bridge Removal - Missing Spruce Under the Bridge

 4 Apr 17, 2012
Reply by John

"I clamped a blade like that into an old table saw after I saw this the first time.Sa…"

John replied Apr 16, 2012 to I want this for Christmas!

 3 Apr 16, 2012
Reply by John

"Looks really good. You could try padding amber shellac. 2 pts alcohol to 5 pts shell…"

John replied Apr 16, 2012 to Repairing a Taylor Top

 8 Apr 16, 2012
Reply by Ned Knepp

"I'd look for a similar grain and colour match, thickness and then match the outside…"

John replied Apr 14, 2012 to Repairing a Taylor Top

 8 Apr 16, 2012
Reply by Ned Knepp

"If you read the post, Hesh refers to the hardness of stainless steel twice. It was t…"

John replied Apr 12, 2012 to Stainless - The End All To Be All....

 32 May 8, 2012
Reply by Ned Knepp

"I worked with a guy that used the triangle files like Frank I liked the results and…"

John replied Apr 10, 2012 to Fret Crowning Files - What Do YOU Like?

 20 Dec 30, 2012
Reply by Thomas James

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service