FRETS.NET

Greg Mirken's Discussions (636)

Search Forum

View

Discussions Replied To (634) Replies Latest Activity

"Photo? Are you talking about a wood crack or separation at the heel? The Taylor neck…"

Greg Mirken replied Apr 24, 2013 to Taylor 214 heel crack

 37 Apr 28, 2013
Reply by Kevin cConlon

"I use Klingspor. Their 10 meter PSA roll is $10, compared to StewMac's 15 yd. 3M rol…"

Greg Mirken replied Apr 15, 2013 to PSA Sandpaper...?

 7 Apr 16, 2013
Reply by Hesh Breakstone

"No, from that picture I'd say it has a loose neck block. If the edge of the soundhol…"

Greg Mirken replied Apr 10, 2013 to Gibson B-45 top crack...

 9 Apr 24, 2013
Reply by Brian Stewart

"I'll second what Joshua said. I'd be surprised if acetone had much if any effect on…"

Greg Mirken replied Mar 25, 2013 to Top cracks: advice needed

 18 Mar 27, 2013
Reply by Steve Williams

"That's a tough one to learn French polish on, John. I've never tried to hide defects…"

Greg Mirken replied Mar 23, 2013 to Refinishing old parlor guitar neck

 11 Mar 24, 2013
Reply by Ned Knepp

"There's no finish on that old bridge. It's simply been burnished by contact with han…"

Greg Mirken replied Mar 1, 2013 to Finish on a Gibson re-placement bridge question?

 11 Mar 5, 2013
Reply by RETROROD

"John, if your bridge is glued on and centered, you have no alternative but to work t…"

Greg Mirken replied Feb 26, 2013 to Neck Alignment

 8 Mar 23, 2013
Reply by Eric Steven Johansen

"Out of curiosity, was the original tailpiece mounted on center or offset toward the…"

Greg Mirken replied Feb 26, 2013 to Neck Alignment

 8 Mar 23, 2013
Reply by Eric Steven Johansen

"Shimming is fine. I use maple veneer, but hard plastic is OK."

Greg Mirken replied Feb 5, 2013 to Shimming Electric Bolt-On Necks?

 31 Jul 21, 2013
Reply by Paul Verticchio

"I think it is extremely difficult or impossible to sand a speck like you describe wi…"

Greg Mirken replied Jan 28, 2013 to Fix color drops - guitar finish

 3 Jan 28, 2013
Reply by Eric Steven Johansen

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service