FRETS.NET

John's Discussions (337)

Search Forum

View

Discussions Replied To (309) Replies Latest Activity

"I've heard vintage enthusiasts complain bitterly about how the dot markers on the re…"

John replied Nov 5, 2011 to Intonation

 18 Nov 16, 2011
Reply by Scott Supak

"I've had no trouble using veneers to support side cracks before, I'm not sure how th…"

John replied Nov 4, 2011 to Patching a side

 25 Dec 22, 2012
Reply by Hesh Breakstone

"Pierre and Jim thank you for your suggestions and encouragement. I started gluing up…"

John replied Nov 4, 2011 to Patching a side

 25 Dec 22, 2012
Reply by Hesh Breakstone

"I wasn't really looking for a vote on replacing the side I was looking for ideas on…"

John replied Oct 30, 2011 to Patching a side

 25 Dec 22, 2012
Reply by Hesh Breakstone

"When I install frets I bevel the ends and put the strings on and play it. If there a…"

John replied Oct 30, 2011 to Plek

 37 Nov 9, 2011
Reply by Russell Vance

"You can use a nut file to do this job or a small V groove chisel. You could plane do…"

John replied Oct 23, 2011 to Ramping string slots

 11 Oct 23, 2011
Reply by Jim Hester

"I use the Lee Valley honing compound with a bullet shaped felt in my Dremel tool for…"

John replied Oct 23, 2011 to What is the best way to shine-up frets, fine steel wool, or fine sand paper?

 10 Oct 23, 2011
Reply by Arthur Sweeney

"For 30yrs I have taken a pencil and held in such a way to make straight line from on…"

John replied Oct 22, 2011 to proper way to shave-down saddle to lower action

 38 Oct 16, 2012
Reply by Paul Verticchio

"I can't remember for sure but aren't there braces where you'd want a bridge plate to…"

John replied Oct 22, 2011 to ovation model 1612-1 possible for bridge conversion?

 8 Oct 24, 2011
Reply by Mike Kolb

"You could do it on a table saw. Use a sacrificial fence and raise the blade in to it…"

John replied Oct 21, 2011 to Best way to cut a fretboard reveal edge on for binding.

 9 Oct 21, 2011
Reply by John

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service