FRETS.NET

William F.Eden's Discussions (620)

Search Forum

View

Discussions Replied To (601) Replies Latest Activity

"If I am building a new Guitar I always put a lite pencil mark around the bridge axac…"

William F.Eden replied Dec 12, 2013 to Bridge popped off!

 10 Dec 12, 2013
Reply by William F.Eden

" I have found that to be the case anyway Jack.Bill............"

William F.Eden replied Dec 2, 2013 to Sapele

 7 Dec 3, 2013
Reply by Andrew

"What is wrong with the new jaws 2 from STU. MAC.?????"

William F.Eden replied Dec 2, 2013 to Fret bucks

 11 Dec 3, 2013
Reply by Robbie Collins

"Good for you Alain some times you just have to resort to someting different to get t…"

William F.Eden replied Dec 2, 2013 to Finish over waxed body...

 21 Dec 7, 2013
Reply by Ernest Kleinman

"You would have to wonder if the top is still glued to the bridge plate at this time.…"

William F.Eden replied Dec 2, 2013 to 1945 D-18 bridge ( let's get it right the 4th? time!)

 19 Dec 13, 2013
Reply by David Farmer

"Well David  you have hit the nail right on the head .It dose make a lot of differens…"

William F.Eden replied Nov 26, 2013 to Measuring the neck set angle (with or without frets installed)

 9 Nov 27, 2013
Reply by Peter Poyser

"Steve the straightedge on top of the frets should clear the front of the bridge by 1…"

William F.Eden replied Nov 25, 2013 to Measuring the neck set angle (with or without frets installed)

 9 Nov 27, 2013
Reply by Peter Poyser

"I would just refinsh the top of the guitar LUKE .I redon a T-125 two years ago the s…"

William F.Eden replied Nov 24, 2013 to Es125 finish problems and crazy FB Radius

 8 Nov 25, 2013
Reply by Kerry Krishna

"I always use turpentine then Naptha then Ammonia that usely takes care of the wax.Bi…"

William F.Eden replied Nov 21, 2013 to Finish over waxed body...

 21 Dec 7, 2013
Reply by Ernest Kleinman

"I beleave  there was a thread just last week on this subject .You mite be wise to lo…"

William F.Eden replied Nov 20, 2013 to Need some finishing advice: pore filler and staining.

 5 Nov 23, 2013
Reply by Andrew

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service