FRETS.NET

Guitar Fixer's Discussions (18)

Discussions Replied To (18) Replies Latest Activity

"Hi Steve, I can explain the finish raising. Martin pockets (routs) the bridge into…"

Guitar Fixer replied Jun 17, 2016 to Nitrocellulose Lacquer

15 Jun 18, 2016
Reply by Steve Burch

"Hi Lee, This appears to be Pau Ferro aka Morado. You can purchase small pieces at R…"

Guitar Fixer replied May 2, 2016 to Martin D-1 R bridge

15 May 7, 2016
Reply by Lee Gendvilas

"The phase in from micarta to richlite occurred in early 2009 and the two thermoplast…"

Guitar Fixer replied Jan 14, 2015 to Heat and sand Richlite fingerboard?

18 Jan 17, 2015
Reply by Alex Glasser

"Hi Dar, I can confirm for you that the bolt used on the Taylor neck/body attachment…"

Guitar Fixer replied Mar 9, 2014 to Taylor Neck Bolt Size

13 Mar 11, 2014
Reply by Darren

"It does have a dovetail but the end of the neck tenon is often tight up against the…"

Guitar Fixer replied Aug 12, 2013 to Old Martin ukulele neck joint…dovetail

9 Aug 12, 2013
Reply by Fren Asken

"Hi Jeff, The finish Taylor uses is 37x6 UV Topcoat. You'll need a light too such as…"

Guitar Fixer replied Jun 12, 2012 to Which UV Cured Topcoat should I use?

3 Jun 12, 2012
Reply by Guitar Fixer

"Hello Christian The neck needs to be reset. Remove the 3 bolts and pull the neck. Yo…"

Guitar Fixer replied Apr 23, 2012 to Ouch! Taylor 110 took a hit

12 Apr 23, 2012
Reply by Christian Johnson

"Thanks Paul, I'm not sure what misinformation I've provided to Len but I wouldn't m…"

Guitar Fixer replied Mar 12, 2012 to Taylor has oxidised nitro .

12 Mar 13, 2012
Reply by Pierre-Antoine Roiron

"Hi Len, The 410 is not lacquer. By the advent of the 400 series Taylor had abandoned…"

Guitar Fixer replied Mar 11, 2012 to Taylor has oxidised nitro .

12 Mar 13, 2012
Reply by Pierre-Antoine Roiron

"Definitely use care in heating micarta. It's a layered material kind of like slate.…"

Guitar Fixer replied Feb 16, 2012 to MICARTA?

35 Feb 18, 2012
Reply by Paul Hostetter

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service