FRETS.NET

Bart van Weperen's Discussions (74)

Discussions Replied To (64) Replies Latest Activity

"the problem is solved Bosch HQ didn't even now they sold the fitting collet. Went to…"

Bart van Weperen replied Jul 12, 2018 to what router to use for the StewMac Router bit, shank diameter 0.25 inch?

6 Jul 12, 2018
Reply by Patrick Corrigan

"Thank you verry much, Murray! I"ll give it a good look"

Bart van Weperen replied Jul 12, 2018 to what router to use for the StewMac Router bit, shank diameter 0.25 inch?

6 Jul 12, 2018
Reply by Patrick Corrigan

"Lucky you! Ok, I'll start looking for that router, thanks! "

Bart van Weperen replied Jul 10, 2018 to StewMac tools and finishes in Europe

7 Jul 10, 2018
Reply by Bart van Weperen

"you're right! Murray MacLeod just linked me to trenddirectuk where I found a collet…"

Bart van Weperen replied Jul 10, 2018 to StewMac tools and finishes in Europe

7 Jul 10, 2018
Reply by Bart van Weperen

"Thank you Murray, it could work... if only the length wouldn't be 66 milimeters ( mi…"

Bart van Weperen replied Jul 10, 2018 to what router to use for the StewMac Router bit, shank diameter 0.25 inch?

6 Jul 12, 2018
Reply by Patrick Corrigan

"Looking for  ball bearing router bits I ended up at Madinter... Found the StewMac ro…"

Bart van Weperen replied Jul 10, 2018 to StewMac tools and finishes in Europe

7 Jul 10, 2018
Reply by Bart van Weperen

"Thanks for all your responses! You all did a great job trying to stay serious while…"

Bart van Weperen replied Mar 26, 2013 to Top cracks: advice needed

18 Mar 27, 2013
Reply by Steve Williams

"And the last picture..."

Bart van Weperen replied Mar 25, 2013 to Top cracks: advice needed

18 Mar 27, 2013
Reply by Steve Williams

"I found info on scale length, now I have to start "digesting" all that...   Not too…"

Bart van Weperen replied Jan 30, 2013 to "Longer" neck (14th or 16th fret meets the body) possible?

20 Jan 30, 2013
Reply by William F.Eden

"I once asked the guy I'm building this thing for if he had any idea on what strings…"

Bart van Weperen replied Jan 30, 2013 to "Longer" neck (14th or 16th fret meets the body) possible?

20 Jan 30, 2013
Reply by William F.Eden

RSS

© 2019   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service