FRETS.NET

Jim Bancroft's Discussions (316)

Discussions Replied To (304) Replies Latest Activity

"Definitely do not use a router. Just use a good sharp exacto knife to put a 45 degre…"

Jim Bancroft replied Sep 5, 2011 to 50's martin uke - progress, question about fixing a hole

4 Sep 5, 2011
Reply by Jim Bancroft

"What has worked for me is warm soapy water, and a toothbrush. Once clean, rinse with…"

Jim Bancroft replied Sep 5, 2011 to Top center seam separation cleaning

10 Sep 6, 2011
Reply by Kerry Krishna

"What may solve the problem is cutting the saddle it 2 pieces. Take a thin kerfed saw…"

Jim Bancroft replied Aug 31, 2011 to Martin under saddle transducer...Little, if any, output on high E

7 Sep 3, 2011
Reply by Jeffrey L. Suits

"Get the product called CLR, available in hardware stores, Walmart, ect. Soak the ite…"

Jim Bancroft replied Aug 10, 2011 to REMOVE SURFACE RUST ?

23 Oct 10, 2011
Reply by Jim Bancroft

"Guitars not worth the effort to refinish. Maybe paint or finish the damaged spot, lo…"

Jim Bancroft replied Jun 21, 2011 to Harmony Archtop Goof Up

13 Jul 12, 2011
Reply by Mark Pollock

"Howard, When you reglue a bridge you're going to clean the old glue off before reglu…"

Jim Bancroft replied Jun 19, 2011 to Glue for Cross Brace Repair and Bridge Reset

5 Jun 20, 2011
Reply by Doug T

"I do very little work on bass guitars or electrics, so I could be wrong, but, with a…"

Jim Bancroft replied Jun 18, 2011 to Bridge Installation

7 Jun 18, 2011
Reply by Alexander López

"Saddle needs positioning so that intonation is correct. That is generally slightly b…"

Jim Bancroft replied Jun 16, 2011 to Bridge Installation

7 Jun 18, 2011
Reply by Alexander López

"Only two choices for glue, either original Titebond or hot hide glue. You also do no…"

Jim Bancroft replied Jun 16, 2011 to Glue for Cross Brace Repair and Bridge Reset

5 Jun 20, 2011
Reply by Doug T

"If the neck reset is perfect, I wouldn't be that concerned with shimming the extensi…"

Jim Bancroft replied Jun 13, 2011 to Fingerboard Extension Shim Advice....

5 Jun 13, 2011
Reply by Jim Bancroft

RSS

© 2019   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service