FRETS.NET

Greg Mirken's Discussions (636)

Search Forum

View

Discussions Replied To (634) Replies Latest Activity

"Good thing you asked. Norman guitars, like all of the brands from Godin, have bolt-o…"

Greg Mirken replied Feb 14, 2009 to Trying to figure out a way to "clamp" a neck

 3 Feb 14, 2009
Reply by Donald A. Fortune

"With your feeler gauge, pay particular attention to the top ends of the X braces whe…"

Greg Mirken replied Feb 12, 2009 to Martin D25K "aging" and neck angle

 28 Mar 7, 2009
Reply by Rob Mercure

"It's a 5 mm. The newer Martin 2-way rods are very deeply set; you need a long wrench…"

Greg Mirken replied Feb 8, 2009 to I just bought a Martin Guitar and I have no idea what size Allen key I need to adjust the Truss Rod

 1 Feb 8, 2009
Reply by Greg Mirken

"Michael is on the mark here. Arching a bridge to fit a bellied top is bass-ackwards.…"

Greg Mirken replied Feb 7, 2009 to New Bridge / Top Belly

 24 Feb 16, 2009
Reply by Jim Bancroft

"Don't bury it deep in the box or the sound is uneven and hollow. I have had the best…"

Greg Mirken replied Feb 5, 2009 to Internal Mic's??

 4 Feb 5, 2009
Reply by onemanband

"The vibrating string describes an arc. The smallest clearance between the vibrating…"

Greg Mirken replied Jan 30, 2009 to Dead flat V/S relief.

 20 Oct 11, 2018
Reply by Greg Miller

"Michael that brace looks like it butts up to its own block against the side. Could t…"

Greg Mirken replied Jan 30, 2009 to Gibson archtop guitar 7878

 11 Feb 2, 2009
Reply by Ron Frazier

"That's what I'd do. If you are trying to "relic" it, you can scrape, sand, or buff m…"

Greg Mirken replied Jan 29, 2009 to Celluloid Binding

 20 Feb 12, 2009
Reply by Von Luhmann

"Tom, I've never found a really satisfactory way to dye binding to look old. It's the…"

Greg Mirken replied Jan 29, 2009 to Celluloid Binding

 20 Feb 12, 2009
Reply by Von Luhmann

"Bob Webster's comment about premature gelling sounds plausible. I aim a heatlamp at…"

Greg Mirken replied Jan 17, 2009 to peghead crack - do i really need hide glue?

 34 May 25, 2009
Reply by Len Biglin

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service