FRETS.NET

Dave Hanna's Discussions (22)

Discussions Replied To (16) Replies Latest Activity

"Take a look at this link:  http://www.moonlightluthiers.com/trussrodjig.htm Shows a…"

Dave Hanna replied Sep 7, 2018 to Re-routing truss rod channel on Harmony Sovereign

4 Sep 23, 2018
Reply by Patrick N. Pope

"Epoxy made for metal will work.  Clean everything thoroughly first with naptha.   Mi…"

Dave Hanna replied Jul 12, 2018 to Vintage Tuner Repair

5 Jul 12, 2018
Reply by Dave Hanna

"Here is my procedure (assuming new, shop made bridge with no slot):  1) Find the bes…"

Dave Hanna replied Jul 12, 2018 to Quick survey about routing saddle slots

4 Jul 12, 2018
Reply by onewent

"https://www.shellac.net/dewaxer_741.html"

Dave Hanna replied Apr 3, 2018 to how to clean a contaminated seam, before regluing?

10 Apr 4, 2018
Reply by Dave Richard

"Try Behlen's 741 Oil and Wax remover. Use it outside away from flame. Don't breath t…"

Dave Hanna replied Apr 2, 2018 to how to clean a contaminated seam, before regluing?

10 Apr 4, 2018
Reply by Dave Richard

"The best by far is the Dewalt  DWP611PK combination kit.  It has an accurately adjus…"

Dave Hanna replied Mar 27, 2018 to Best trim router for a saddle slotting jig

26 Apr 13, 2018
Reply by Robbie Collins

"Hopefully not."

Dave Hanna replied Mar 4, 2018 to water slide decals

6 Mar 6, 2018
Reply by Gus

"Not that i know of."

Dave Hanna replied Mar 4, 2018 to water slide decals

6 Mar 6, 2018
Reply by Gus

"The jig is an old Marples dowling jig.  All cast aluminum with steel bit guides.  Lo…"

Dave Hanna replied Feb 6, 2018 to Drilling the Truss Rod Access Hole Through the Upper Bout Cross Brace

4 Feb 6, 2018
Reply by Dave Hanna

"No, Gibson LG-3 (solid top), but National 1160 Neck.  No truss rod.  It is a custome…"

Dave Hanna replied Feb 6, 2018 to Drilling the Truss Rod Access Hole Through the Upper Bout Cross Brace

4 Feb 6, 2018
Reply by Dave Hanna

RSS

© 2019   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service