FRETS.NET

David Newton's Discussions (21)

Discussions Replied To (19) Replies Latest Activity

"In the dim recesses of my memory is a Gibson with the top wood covering the dovetail…"

David Newton replied Aug 19, 2008 to Gibson non-tapered neck dovetails...Aaargh!

5 Aug 24, 2008
Reply by C Herb Hickman

"Not Frank, but I used Evo on my latest guitar, and I may change over to it as my sta…"

David Newton replied Aug 14, 2008 to Stainless Steel Fretwire...The Good, the Bad and the Ugly!

14 Nov 1, 2008
Reply by Mike Kolb

"If your neck wood and fretboard is nice and stiff / stable, .200" x .250" is plenty.…"

David Newton replied Aug 14, 2008 to Graphite neck reinforcement

8 Aug 17, 2008
Reply by Donald A. Fortune

"So Bruce, you're answering your own questions now? I have several of the Scott Ante…"

David Newton replied Aug 12, 2008 to 000/0M plans, anyone know if they exist?

8 Aug 13, 2008
Reply by Bruce Herrmann

"Hi Herb, welcome back to building. A steam chamber is a waste, you won't be able to…"

David Newton replied Aug 9, 2008 to Bending Black Walnut

20 Jun 1, 2009
Reply by Steve Frost

"12fret, if you built a form around the outside, it would limit your ability to align…"

David Newton replied Aug 7, 2008 to Getting the back back on perfectly

11 Sep 9, 2008
Reply by Charlie Hoffman

"Stretchy duct tape!"

David Newton replied Aug 7, 2008 to Ovation Neck Re-set

12 Dec 4, 2011
Reply by William F.Eden

"Hi Josh. On strings 1, 2, & 3, tie on a ball from a steel string, on strings 4,…"

David Newton replied Aug 7, 2008 to Gut Strings and a pin bridge

5 Aug 17, 2008
Reply by Donald A. Fortune

"Hey Frank. Thanks for starting a place for people who keep ebony and rosewood pieces…"

David Newton replied Aug 7, 2008 to Welcome to FRETS.NET

39 Oct 31, 2008
Reply by thefishinmusician

RSS

© 2023   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service