FRETS.NET

Jeffrey L. Suits's Discussions (279)

Discussions Replied To (279) Replies Latest Activity

"Welcome to the world of Yamaha neck resets; this is very common with Yamahas. What u…"

Jeffrey L. Suits replied Feb 1, 2009 to Yamaha Gaki Neck reset

15 Feb 3, 2009
Reply by Ray Hughes

"I have a pair of diamond files, older Stewmac w/ rounded nose. I've also used their…"

Jeffrey L. Suits replied Jan 25, 2009 to Which Diamond fret file?

43 Mar 25, 2011
Reply by Brian Hansen

"You're going to buy ANOTHER set of double edge nut files? Lesson not learned."

Jeffrey L. Suits replied Jan 24, 2009 to Nut files

20 Aug 23, 2009
Reply by Dave Yelverton

"This is operator error; one can certainly file a proper crown with either a safe edg…"

Jeffrey L. Suits replied Jan 12, 2009 to Need Medium Fret Burr

16 Mar 20, 2011
Reply by bob macorcinaail

"The "Gold" fretwire is an alloy called Evo, in between nickel-silver and stainless s…"

Jeffrey L. Suits replied Jan 8, 2009 to Brass frets?

11 Jan 17, 2009
Reply by Ron Frazier

"SOMEONE MENTIONED ON ANOTHER FORUM THAT YOU CAN HEAT THE BOWL AND CLAMP THE NECK BAC…"

Jeffrey L. Suits replied Jan 8, 2009 to OVATION ACOUSTICS

19 Aug 11, 2012
Reply by Tim Mace

"Just two 9v batteries in series, and, please consider not using all caps in your pos…"

Jeffrey L. Suits replied Jan 7, 2009 to 18 VOLT MOD EMG P/U

3 Jan 7, 2009
Reply by FRANK

"Since I first responded to this, I refretted an old Yamaha FG230, same canyoned fret…"

Jeffrey L. Suits replied Dec 31, 2008 to Huge fret slots - what's the best way to snug them up?

15 Jan 1, 2009
Reply by FRANK

"If I had to get that done, I'd crimp the tang."

Jeffrey L. Suits replied Dec 9, 2008 to Huge fret slots - what's the best way to snug them up?

15 Jan 1, 2009
Reply by FRANK

"I'd suggest removing the adjusting nut, and slipping a very small washer or two over…"

Jeffrey L. Suits replied Dec 5, 2008 to Leveling frets

17 Mar 5, 2009
Reply by Jeffrey L. Suits

RSS

© 2022   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service