Jim Doyle's Discussions (8)

View

Discussions Replied To (7)	Replies	Latest Activity
"Joel, 1. After removing the nut and washer I Modified a cutter I had so it fit over…" Jim Doyle replied Jul 3, 2014 to Neck reset 1970's Epiphone FT 565	16	Jan 31, 2016 Reply by Michael Cross
"Joel, I used the Stew Mac flush cut saw part #3614, I had either side of the neck on…" Jim Doyle replied Jul 1, 2014 to Neck reset 1970's Epiphone FT 565	16	Jan 31, 2016 Reply by Michael Cross
"Fortunately have lots of time, and this was purchased From the original owner's Wido…" Jim Doyle replied Jul 1, 2014 to Neck reset 1970's Epiphone FT 565	16	Jan 31, 2016 Reply by Michael Cross
"Ian, My original thought was to use at least the upper dowels, So I took the time to…" Jim Doyle replied Jul 1, 2014 to Neck reset 1970's Epiphone FT 565	16	Jan 31, 2016 Reply by Michael Cross
"Joel. I have a few but will try to shoot you 3 since the site limits me to 5MB and t…" Jim Doyle replied Jul 1, 2014 to Neck reset 1970's Epiphone FT 565	16	Jan 31, 2016 Reply by Michael Cross
"Joel, Yes I did, and it was a Pain. Found out that they seem to use some kind of ep…" Jim Doyle replied Jun 30, 2014 to Neck reset 1970's Epiphone FT 565	16	Jan 31, 2016 Reply by Michael Cross
"Ian, Thanks for the information, I'm in the same boat as you, even though the cons…" Jim Doyle replied Feb 12, 2014 to Neck reset 1970's Epiphone FT 565	16	Jan 31, 2016 Reply by Michael Cross

Members