FRETS.NET

Dave Yelverton

Dave Yelverton's Discussions (59)

Discussions Replied To (54) Replies Latest Activity
Mark Riess

"Its a German bowed zither (Streichzither) Hers's a very similar one. Dates from lat…"

Dave Yelverton replied Dec 7 to Ever seen something like this?

8 Dec 7
Reply by Mark Riess
Kelvin Monaghan

"Seems to be a popular wood in Oz.. I've seen quite a bit on eBay but usually from Au…"

Dave Yelverton replied Dec 3 to Ladder bracing a Weissenborn

9 Dec 4
Reply by Kelvin Monaghan
Kelvin Monaghan

"Hi Kelvin I'm sorry to say I haven't any ideas to offer on the subject. However, I d…"

Dave Yelverton replied Dec 2 to Ladder bracing a Weissenborn

9 Dec 4
Reply by Kelvin Monaghan
Miguel - Musictools

"Don't know if my exchange rate program is working properly but if it is, the prices…"

Dave Yelverton replied Nov 28 to Luthier tools in Brazil

4 Nov 29
Reply by Miguel - Musictools
Jack Lord

"I'd agree with David and Tim to this extent; mahogany is variable. For good mahogany…"

Dave Yelverton replied Nov 21 to Back Thickness

12 Nov 21
Reply by Jack Lord
Jack Lord

"Jack, I think the plan specifies 0.1". I don't pretend to be an expert, but IMHO 0.0…"

Dave Yelverton replied Nov 20 to Back Thickness

12 Nov 21
Reply by Jack Lord
Jack Lord

"Jack Here's a generic OO plan in pdf format. It's full size, so you can take it dow…"

Dave Yelverton replied Nov 20 to Back Thickness

12 Nov 21
Reply by Jack Lord
PAUL

"I use alcohol to thin the epoxy as I use a vinyl sealer on the bare wood and don't w…"

Dave Yelverton replied Nov 20 to cocobolo finish problem 411

10 Nov 20
Reply by Dave Yelverton
PAUL

"Paul, don't forget to wear gloves, otherwise you might achieve a closer bond with yo…"

Dave Yelverton replied Nov 19 to cocobolo finish problem 411

10 Nov 20
Reply by Dave Yelverton
PAUL

"Mix up epoxy (rapid-setting. I use West's.) with micro beads or colloidal silica. Ma…"

Dave Yelverton replied Nov 19 to cocobolo finish problem 411

10 Nov 20
Reply by Dave Yelverton
  • First
  • Previous
  • Next
  • Last
  • Page 1 of about 6

RSS

© 2009   Created by Frank Ford on Ning.   Create a Ning Network!

Badges  |  Report an Issue  |  Privacy  |  Terms of Service