FRETS.NET

Russell Vance's Discussions (1,232)

Discussions Replied To (1220) Replies Latest Activity

"Yep, Bob, I noted this problem many years ago and now keep glass between alcohol and…"

Russell Vance replied Mar 15, 2009 to A warning re denatured alcohol in French polishing

6 Mar 16, 2009
Reply by Ned Knepp

"go to http://www.timeelect.com/54-neck.htm for the complete expose of Fender truss r…"

Russell Vance replied Mar 15, 2009 to Anyone have any info regarding truss rod anchor on a solid maple (fender) neck, vintage style single action,adjuster at bottom.

6 May 21, 2010
Reply by Nick Bucci

"Thanks for the most gracious reply, - it's not the shimming that changes the tone -…"

Russell Vance replied Mar 12, 2009 to Tell the customer or no?

8 Mar 15, 2009
Reply by Mike Baker

"Dear Mike, Strats and the like often have this appearance due to the long screws whi…"

Russell Vance replied Mar 12, 2009 to Tell the customer or no?

8 Mar 15, 2009
Reply by Mike Baker

"Fishman do a unit called Switchjack. Gold finish,stereo/mono, tightens from outside…"

Russell Vance replied Mar 11, 2009 to Pick-Up end pin Q

3 Mar 12, 2009
Reply by gordon

"The backset saddle may give you enough intonation range but I would dummy up the adj…"

Russell Vance replied Mar 11, 2009 to "Backset" AC saddle?

27 Jul 23, 2009
Reply by Antonio Cotichini

"Umm, sorry about that - the only stuff I've seen has the bore but that probably is a…"

Russell Vance replied Mar 9, 2009 to Using an Arbor Press for fretting

23 Aug 29, 2012
Reply by Dan Pennington

"Dear Larry, your one-tonner will do just fine, the Stewmac fitting has a half inch s…"

Russell Vance replied Mar 9, 2009 to Using an Arbor Press for fretting

23 Aug 29, 2012
Reply by Dan Pennington

"Bob, yep - carbide tipped 3/8 bits keep the tip speed down and manoeuvre well - for…"

Russell Vance replied Mar 6, 2009 to Granite Sanding Slab

15 May 7, 2009
Reply by Frank Medina

"Yep, that's about what it takes all thing tallied up - the refinishing and attention…"

Russell Vance replied Mar 6, 2009 to Refret Strat Maple Neck

13 Mar 7, 2009
Reply by thefishinmusician

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service