FRETS.NET

Russell Vance's Discussions (1,230)

Search Forum

View

Discussions Replied To (1218) Replies Latest Activity

"Ed, Most of my fingerboards are Madagascar ebony and I use a press and caul arrangem…"

Russell Vance replied Oct 9, 2008 to Fingerboard Chipping when hammering Frets

 8 Oct 11, 2008
Reply by Jim Bancroft

"Hi Doug, couple of things, the thinner the sides the more relevant the reinforcement…"

Russell Vance replied Oct 9, 2008 to Side re-enforcement

 7 Oct 9, 2008
Reply by Doug Collins

"Larry I'm out in Australia, I can send you a neck but suggest you hook up with a clo…"

Russell Vance replied Oct 7, 2008 to New guitar or new neck?

 11 Oct 7, 2008
Reply by Russell Vance

"Larry, I presume the neck is what Taylor call a 'new technology' neck (a bolt on) -…"

Russell Vance replied Oct 5, 2008 to New guitar or new neck?

 11 Oct 7, 2008
Reply by Russell Vance

"Christian, sorry mate, didn't mean to tell you how to suck eggs......I have some dif…"

Russell Vance replied Sep 30, 2008 to Really wide fret slots

 10 Nov 6, 2008
Reply by Jeffrey L. Suits

"Hi Steve, Umm, I'm not sure how to approach this one - I've been a full time luthier…"

Russell Vance replied Sep 28, 2008 to How many repair guys have an engineering background?

 10 Sep 28, 2008
Reply by Russell Vance

"When you remove the frets, dress the fingerboard with a caul down a mm or so, which…"

Russell Vance replied Sep 27, 2008 to Really wide fret slots

 10 Nov 6, 2008
Reply by Jeffrey L. Suits

"Yep, I tend to avoid discussions on hide v Titebond as I have no experience with Hid…"

Russell Vance replied Sep 27, 2008 to Hide Glue

 9 Jun 17, 2010
Reply by LARRY KLOSE

RSS

Members

© 2023   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service