FRETS.NET

Dave's Discussions (33)

Discussions Replied To (29) Replies Latest Activity

"I don't know modern instruments from Asia, but I have seen pics of a (very) early Gu…"

Dave replied Oct 5, 2011 to grovers&plywood

4 Oct 6, 2011
Reply by keith angus

"Here's another Frank Ford trick for getting dirt from cracks: http://www.frets.com/F…"

Dave replied Sep 5, 2011 to Top center seam separation cleaning

10 Sep 6, 2011
Reply by Kerry Krishna

"My wife inherited a '66 LG-0 with spruce bridgeplate and screwed on plastic bridge.…"

Dave replied Jul 13, 2011 to Tool for bridge plate removal

11 Jul 16, 2011
Reply by Magnus Hultin

"http://www.frets.com/FRETSPages/pagelist.html   Scroll down the page..."

Dave replied Jun 24, 2011 to 1990 Martin D 35-P Soundhole and neck joint damage

10 Jun 25, 2011
Reply by Magnus Hultin

"I just had a local repairman replace the plastic bridge on a '66 LG-0 that that my w…"

Dave replied Feb 15, 2011 to Gibson LGO with bridge lifting problem

13 Feb 24, 2011
Reply by Jeffrey L. Suits

"Thanks, Mark, If I do anything, I'll fill. The bottom of the nut slot now sits even…"

Dave replied Feb 1, 2011 to Filling/seating new nut on old Guild D-50...

7 Feb 1, 2011
Reply by Jim Bancroft

"Mike, thanks again for your reply! For now, I am going to hold onto the old nut with…"

Dave replied Jan 30, 2011 to Filling/seating new nut on old Guild D-50...

7 Feb 1, 2011
Reply by Jim Bancroft

"I actually did score around the nut on the sides, fret board edge, and edge of the f…"

Dave replied Jan 29, 2011 to Filling/seating new nut on old Guild D-50...

7 Feb 1, 2011
Reply by Jim Bancroft

"Guild's F-612 twelve string had an 18" lower bout with 5" depth."

Dave replied Sep 7, 2010 to What to Build with an 18" set of Brazilian Rosewood

16 Mar 28, 2021
Reply by Chris Andrada

"You might check over at the "Lets Talk Guild" forum: http://letstalkguild.com/phpBB2…"

Dave replied May 11, 2010 to 1981 Guild F212 Bridge Height/Thickness

6 May 15, 2010
Reply by Scott C. Bryan

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service