FRETS.NET

John C. Murray's Discussions (15)

Discussions Replied To (15) Replies Latest Activity

"and I think this horse is dead..."

John C. Murray replied Dec 10, 2010 to Cheaper Fret tang cutters

17 Dec 10, 2010
Reply by Ned Knepp

"I did do this rather than buy another stew mac set for larger fret wire...nibbler co…"

John C. Murray replied Dec 10, 2010 to Cheaper Fret tang cutters

17 Dec 10, 2010
Reply by Ned Knepp

"I would love to hear if the corian works...."

John C. Murray replied Dec 10, 2010 to Any Good Substitute for Ivory?

8 Dec 14, 2010
Reply by Bruce Herrmann

"Len is spot on with finding some old ivory from a piano guy, but if that does not wo…"

John C. Murray replied Dec 9, 2010 to Any Good Substitute for Ivory?

8 Dec 14, 2010
Reply by Bruce Herrmann

"Paul, I am not out to demonize anyone. I never said that the tool didn't serve me we…"

John C. Murray replied Dec 9, 2010 to Cheaper Fret tang cutters

17 Dec 10, 2010
Reply by Ned Knepp

"oh, and when you say press, I presume you mean the caul at the waist...never a rocki…"

John C. Murray replied Dec 9, 2010 to Side bender questions....

15 Dec 9, 2010
Reply by Doug T

"the total width of my bending form is 11 1/2"...this allows for the 3/4" plywood on…"

John C. Murray replied Dec 9, 2010 to Side bender questions....

15 Dec 9, 2010
Reply by Doug T

"Thanks Gage, I would be able to index the sides if I chose to, however that is not m…"

John C. Murray replied Dec 9, 2010 to Side bender questions....

15 Dec 9, 2010
Reply by Doug T

"be sure to use DEWAXED shellac for a sealer or the flaking will ensue. personally, I…"

John C. Murray replied Dec 8, 2010 to SANDING SEALER PRIOR TO NITRO ???

16 Dec 8, 2010
Reply by FRANK

"be veryyyyyyyyyyyy careful cleaning this guitar...that logo could disappear in an in…"

John C. Murray replied Dec 8, 2010 to Pre-War Unidentified Gibson Acoustic

6 Dec 8, 2010
Reply by John C. Murray

RSS

© 2022   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service