I have an old guitar which needs to be refretted, but I am unable to find suitable fret.
The size is as follows:
tongue thickness 0.78 mm
thickness with barbs 1 mm ( 0.988)
tongue hight, without crown 1.3 mm
with crown 2.5 mm ( probably fraction more as it is worned-out)
crown width 2.2 mm

Could anyone help?

Tomo Mlinarich.

Views: 146

Reply to This

Replies to This Discussion

You might want to check out Ebay under some of the Ebay Stores. I needed some really narrow fret wire for a mandolin and I found it there. There is quite a bit of stuff available there and it appeared to be reasonably priced.

Ronnie Nichols
Check out Paul Hostetter's listing of currently available fret sizes:


© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service