Frets
I have an old guitar which needs to be refretted, but I am unable to find suitable fret.
The size is as follows:
tongue thickness 0.78 mm
thickness with barbs 1 mm ( 0.988)
tongue hight, without crown 1.3 mm
with crown 2.5 mm ( probably fraction more as it is worned-out)
crown width 2.2 mm
Could anyone help?
Regaeds,
Tomo Mlinarich.
The size is as follows:
tongue thickness 0.78 mm
thickness with barbs 1 mm ( 0.988)
tongue hight, without crown 1.3 mm
with crown 2.5 mm ( probably fraction more as it is worned-out)
crown width 2.2 mm
Could anyone help?
Regaeds,
Tomo Mlinarich.
Views: 154
Replies to This Discussion
-
Permalink Reply by Ronnie Nichols on
-
You might want to check out Ebay under some of the Ebay Stores. I needed some really narrow fret wire for a mandolin and I found it there. There is quite a bit of stuff available there and it appeared to be reasonably priced.
Ronnie Nichols
-
Permalink Reply by Frank Ford on
-
Check out Paul Hostetter's listing of currently available fret sizes:
http://www.lutherie.net/fret.chart.html
© 2025 Created by Frank Ford.
Powered by
