I had an artec blend/tone set up going with a humbucker and piezo, both passively wired but of course the power going to the tone circuit.  Suddenly failed.  Got another wired same way, does not work at all.  If I wire actively I get both to work but no volume or tone and blend pot is strange with no volume on the extremes and only blend in the middle.  Is there a way to wire up such a thing without having to rely on an active circuit?  Could I just have two seperate volumes and a master tone completely passively?  Thanks

Views: 97

Reply to This

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service