FRETS.NET

FWIW. I came up with this today. Reamed out a standard LP jack plate to hold a switch while I soldered. One snug screw and it's stable. Leaves good lead lengths for service too.

Views: 146

Reply to This

Replies to This Discussion

Hey Thomas,

Good idea. I think I'll use that method. Later,

Mike

Thanks for the tip! Surely makes the job easier and less likely to damage the finish with solder or hot soldering iron.

RSS

© 2022   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service