FRETS.NET

Hi everyone , This is a Martin with an aluminium soundboard , the bridges on these tend to let go . This one has been reglued 3 times , taking care to scuff the metal and using hi strength epoxy . Im in Australia so returning to factory is not an option . Any ideas ?

Views: 750

Reply to This

Replies to This Discussion

Still in work after this proof of data is the aluminum billet top.

The bottom half is at the CNC shop.

Attachments:

Wow Brian, that is shiny! 

thats 24k  over aluminum with PVD to lock it down no scratches. another project.

RSS

© 2021   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service