Martin with alloy soundboard
Hi everyone , This is a Martin with an aluminium soundboard , the bridges on these tend to let go . This one has been reglued 3 times , taking care to scuff the metal and using hi strength epoxy . Im in Australia so returning to factory is not an option . Any ideas ?
Views: 1040
Replies to This Discussion
-
Permalink Reply by Brian Ostosh on
-
Still in work after this proof of data is the aluminum billet top.
The bottom half is at the CNC shop.
- Attachments:
-
-
IMAG0320 (3).jpg, 609 KB -
LP Reflection outside.jpg, 1.2 MB
-
-
Permalink Reply by Mark McLean on
-
Wow Brian, that is shiny!
-
-
thats 24k over aluminum with PVD to lock it down no scratches. another project.
- ‹ Previous
- 1
- 2
- Next ›
© 2025 Created by Frank Ford.
Powered by
