I'm building a 000 kit from Stewmac. When gluing the top to the sides there is supposed to be a little bit of overhang all the way around. This is true for the most part but there are a couple sections where this is not the case and the sides actually come out beyond the edge of the top. I'm finding it really hard to push the sides in. Is this little bit of "underhang" ok or is it critical that the top overhangs all the way around. And if so, what do I do about it?
I called and emailed Stewmac but nobody is responding, possibly because of the long weekend. I wouldn't mind waiting to hear from them but with the long weekend coming up and a lot of time I have available to work on this, I hate to have my project sit 3 days until everyone comes back to work next week.
Many thanks for any advice.