Forum Discussions (4,426)
| Discussions | Replies | Latest Activity |
|---|---|---|
Malaysian BlackwoodI just read the discussion about Gluing Blackwood. I have just purchased a set of Malaysian blackwood from Allied Lutherie. I had wondere… Started by David Houchens in Luthier Talk |
1 |
Apr 12, 2011 Reply by Len Biglin |
Stiff feel on acoustic-WhyI'm sure this is a question that's been asked before but I'm trying to figure this out. I have a very well made hand-built acoustic guitar,… Started by gordon in Luthier Talk |
38 |
Apr 12, 2011 Reply by gordon |
poly finishHello Everybody, Question: I have to strip a electric guitar that has a poly finish and does anybody have a idea what to use to get it off.… Started by Michael P. Lemieux in Luthier Talk |
9 |
Apr 12, 2011 Reply by Michael P. Lemieux |
guitar building woodIm looking for guitar building wood that ia longer than 21 inches long for building a guitar that requires it. if anyone can point me in th… Started by Donald A. Fortune in Luthier Talk |
9 |
Apr 11, 2011 Reply by FRANK |
Vacuum Clamping Question.I'm just entering the world of gravity clamping via vacuum and need a little help from anyone who uses this system. I'm working on buildi… Started by Scot Tremblay in Luthier Talk |
4 |
Apr 11, 2011 Reply by Pierre-Antoine Roiron |
Use of rectifiersI have recently been considering a build with a hum neck and piezo bridge. My concern is that the piezo will overdrive the hum and essenti… Started by Doug T in Luthier Talk |
15 |
Apr 8, 2011 Reply by Doug T |
Anyone looking for a good sounding beater to practice on?I have an old Harmony that needs some work, but obviously is not worth putting any money into. I has a surprisingly good sound. I was consi… Started by Jay Peterson in Luthier Talk |
24 |
Apr 8, 2011 Reply by Matt Haugen |
Loose Neck Joint - Gibson ES125TGreetings, I have a '64 ES 125T and the neck joint is slightly loose. You can see the heel gap in the photo, but it's not wide enough to i… Started by onewent in Luthier Talk |
5 |
Apr 5, 2011 Reply by Jeff Highland |
Modifications to LMI fret benderThis fret bender does a great job, but I find the controls clumsy and imprecise. Here's a mod I did to mine using a drill and dremel: Fro… Started by Simon Bancroft in Luthier Talk |
14 |
Apr 4, 2011 Reply by Simon Bancroft |
Glitter clear coatDoes anyone know of any 'glitter/metalic' clearcoats? A client wants strat style finished in a 'psychodelic' finish. Not a metallic lac.,… Started by Chris Rochow in Luthier Talk |
5 |
Apr 4, 2011 Reply by Donald A. Fortune |
© 2026 Created by Frank Ford.
Powered by
