Forum Discussions (4,420)
| Discussions | Replies | Latest Activity |
|---|---|---|
Difficulty with drop fillsI recently tried the drop fill technique on a couple finish scratches on my guitar, after the superglue was applied and had dried there was… Started by david ericson in Luthier Talk |
6 |
Aug 17, 2015 Reply by david ericson |
Frank Gay biography"Prairie Bohemian: Frank Gay's Life in Music" is a new book, hot off the press with many old photographs. Check it out! http://www.uap.ual… Started by UAPress in Luthier Talk |
6 |
Aug 17, 2015 Reply by UAPress |
Flat Radius = Flat Saddle? Classical SetupHey everyone, EDIT: I started this thread asking about nuts for classical guitars but I now need some more general setup advice. I'm sett… Started by Pete Andreev in Luthier Talk |
3 |
Aug 16, 2015 Reply by Greg Mirken |
Crack at Neck and Headstock join repair strengthHi, I was hoping someone may give me some advice. I am considering buying a used Larrivee acoustic guitar. It has had a crack repaired… Started by Paul Said in Luthier Talk |
5 |
Aug 15, 2015 Reply by Howard Klepper |
Makings Bends Possible: Flatten Fret Radius??I have a '62 Road Worn Strat that I really love. I'm setting it up after having it on a stand for a few months and I'm having an issue. The… Started by Pete Andreev in Luthier Talk |
13 |
Aug 14, 2015 Reply by Hesh Breakstone |
Ibanez tech repI've got a 2002 Ibanez SR type 5 string bass in for electrics replacement. The controls were fried( someone let the smoke out) the owner br… Started by Peter Laine in Luthier Talk |
1 |
Aug 12, 2015 Reply by Demetry Merkuloff |
KTM-9 discontinued... now what?I have been using KTM-9 waterbased lacquer on my guitars with good success, but I see now that due to a fire at the factory it is no longer… Started by Doug Collins in Luthier Talk |
1 |
Aug 11, 2015 Reply by Mark Fogleman |
Epiphone FT147 Neck resetI have a 1972 Epiphone FT147, dreadnought flat-top, MIJ (probably by FujiGen) which needs a neck reset. Couldn’t find anything on the net t… Started by Ian Barker in Luthier Talk |
12 |
Aug 11, 2015 Reply by Ian Barker |
$40 Vintage Suzuki No 7 RepairHi All, I'II like to have a go at repairing this beat up early 60's acoustic guitar I purchased a while back but require some adv… Started by Paul Said in Luthier Talk |
3 |
Aug 9, 2015 Reply by Paul Said |
Strat truss rod does nothingWell, I exaggerate, but it in no way is doing a good job of taking the significant bow out of this neck. Looking for cost-effective options… Started by Keith Somerville in Luthier Talk |
9 |
Aug 9, 2015 Reply by Mike Kolb |
© 2026 Created by Frank Ford.
Powered by
