Forum Discussions (4,420)
| Discussions | Replies | Latest Activity |
|---|---|---|
Fixing a new bridge to a damaged laminated topHi all, I read a comment by Frank Ford regarding fixing a bridge using epoxy. So if you see this Frank or indeed anyone who has good advic… Started by Alan Osborne in Luthier Talk |
11 |
Mar 13, 2018 Reply by Alan Osborne |
Piezo question: How loud is a K and K Mini by itselfHow loud is a K and K Mini with say, only a 6 foot chord, compared to a Humbucking pickup with both being plugged straight into an amp? Is… Started by Kerry Krishna in Luthier Talk |
4 |
Mar 12, 2018 Reply by LARRY KLOSE |
Possible to repair sunken top through F-holes?Hi, everyone. A customer has brought a 1940s Gibson L-7 which has a top that is somewhat sunken. Since it has no pickup hole to work thro… Started by Eric Gleason in Luthier Talk |
2 |
Mar 12, 2018 Reply by Len Biglin |
Hardware : BIGSBY Retrofit Solutions by TOWNERLuthiers & Guitar Techs, back in 2011 I introduced to market the down tension bar to retrofit Bigsby B3's and B6's (with 'ex-short' hin… Started by Christian J Towner in Metalworking, Machining, Tool & Fixture Making for Luthiers |
3 |
Mar 10, 2018 Reply by Christian J Towner |
o.w. appleton - the original "inventor" of the les paulthis dude was pretty smart. check this fret saw out! behold the awesomeness: apparently this dude also invented the aluminum neck guit… Started by casey campbell in Luthier Talk |
18 |
Mar 9, 2018 Reply by Mark Pollock |
Gibson HG-00 hawaiian conversion to fretted style .Has anyone done or know about the HG-00 guitar and how they go after conversion ? My customer is considering a purchase , and I'm thinking… Started by Len Biglin in Luthier Talk |
2 |
Mar 9, 2018 Reply by Len Biglin |
Top stiffnes with lacquer addedCome to think about the lacquer we put on a spruce top without thinking much about it. But it's not just a protective surface and a thing o… Started by Roger Häggström in Luthier Talk |
3 |
Mar 9, 2018 Reply by Andrew |
Problem with friction tuners on 50s Martin tenor ukuleleTo keep this ukulele in tune, I have gotten to the point where I have to tighten the screws on the friction tuners to the point that the tu… Started by Jeff Twersky in Luthier Talk |
4 |
Mar 9, 2018 Reply by Richard Bales |
What am I missing here?On the bench is a 60's-vintage Japanese acoustic 12-string that arrived in pieces. It has a trapeze tailpiece and uses a zero-fret at the n… Started by Mike Kolb in Luthier Talk |
11 |
Mar 9, 2018 Reply by Richard Bales |
water slide decalsThere is a very cool decal service run by Gus Salmon (ussalmon@gmail.com). He makes water slide decals. If you can send him an accurate… Started by Dave Hanna in Luthier Talk |
6 |
Mar 6, 2018 Reply by Gus |
© 2026 Created by Frank Ford.
Powered by
