FRETS.NET

Mark McLean's Discussions (374)

Search Forum

View

Discussions Replied To (369) Replies Latest Activity

"That magnet in the bag trick should be included in the annals of genius and simplici…"

Mark McLean replied Oct 22, 2011 to What is the best way to shine-up frets, fine steel wool, or fine sand paper?

 10 Oct 23, 2011
Reply by Arthur Sweeney

"  http://www.ovationtribute.com/Ovation%20Bracing/Ovation%20Bracing.html This site s…"

Mark McLean replied Oct 22, 2011 to ovation model 1612-1 possible for bridge conversion?

 8 Oct 24, 2011
Reply by Mike Kolb

"I've tried it with a Dremel but it made me feel very nervous, for the reason that Pa…"

Mark McLean replied Oct 22, 2011 to Ramping string slots

 11 Oct 23, 2011
Reply by Jim Hester

"Hi Murray Thinking about Paul's cautionary words I decided that I would try to set u…"

Mark McLean replied Oct 20, 2011 to proper way to shave-down saddle to lower action

 38 Oct 16, 2012
Reply by Paul Verticchio

"So, Paul and Harrison, is it possible to make a good saddle and bridge combo myself.…"

Mark McLean replied Oct 19, 2011 to proper way to shave-down saddle to lower action

 38 Oct 16, 2012
Reply by Paul Verticchio

"This is the main reason, IMHO, to favour Titebond over HHG for doing a complicated a…"

Mark McLean replied Oct 16, 2011 to Gluing on a front.

 19 Oct 27, 2011
Reply by Tom Mitchell

"Like everyone has said, you take material off the bottom of the saddle - but it is i…"

Mark McLean replied Oct 16, 2011 to proper way to shave-down saddle to lower action

 38 Oct 16, 2012
Reply by Paul Verticchio

"Just watch out for allergy/sensitivity.  You might not be sensitive to it but many p…"

Mark McLean replied Oct 14, 2011 to Cocobolo??

 7 Oct 14, 2011
Reply by FRANK

"Haven't seen it, but it can't be too hard to have a pest exterminator treat the guit…"

Mark McLean replied Oct 5, 2011 to Termites!!

 19 Oct 9, 2011
Reply by Tom Mitchell

"Keith To pick solid wood from ply - It is not whether the grain pattern of the sides…"

Mark McLean replied Oct 4, 2011 to grovers&plywood

 4 Oct 6, 2011
Reply by keith angus

RSS

Members

© 2026   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service