FRETS.NET

Hi all.  I have a question..has anyone heard of a way that a super strong but super thin material ( ebony)  that can be used as both a shim under the fretboard to straighten out an old non truss rod neck as well as it raising the action a bit. Any help would be greatly appreciated.

Tags: Duolian, National, bow, neck, reset, shim

Views: 496

Reply to This

Replies to This Discussion

Danny , I think you need to describe the problem better , rather than your cure . Photos?

Shimming the fretboard on a National is a non-starter IMO.

Read through this article, http://www.strangeguitarworks.com/national-resonator-neck-reset/  , it will give you an idea of the way to go about solving your problem, which I suspect is identical to the one in the article. 

hi Murray, thanks for the info..the article is great

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service