Forum Discussions (4,417)
| Discussions | Replies | Latest Activity |
|---|---|---|
New Gibson and Epiphone tap pot failuresSo, I've had both new Gibson and Epiphone guitars in for bad pots. The push / push pots just stop working and turn into a pogo stick, and… Started by Brian Hart in Luthier Talk |
9 |
Nov 20, 2013 Reply by tadej bratkovic |
One for KerryI would have contacted you personally, but I don't have your info. Other members please forgive me. ? Found this: http://pittsburgh.craigsl… Started by Thomas James in Luthier Talk |
3 |
Nov 20, 2013 Reply by Kerry Krishna |
Almost a 1.99 jack grabberFirst of all kudos to Frank who designed the jack gripper with the knurled tip and partially gave the idea to this crude invention that was… Started by tadej bratkovic in Luthier Talk |
1 |
Nov 19, 2013 Reply by Frank Ford |
Eko Guitar Finish RemovalHi All. I am about to start a new project, an Eko guitar. Almost every Eko I have seen has had nasty finish cracks, as does this one. The f… Started by Matt Haugen in Luthier Talk |
1 |
Nov 17, 2013 Reply by LARRY KLOSE |
Top and back radius of ukuleles.I think the top and back radius should be much smaller than a guitar. Six foot back and twelve for top. I'd like to know what you think. Started by John in Luthier Talk |
4 |
Nov 17, 2013 Reply by Ernest Kleinman |
If this doesn't make your Friday, well, I just don't know what will...Opened the case on this bad boy this morning And another... And just in case those don't suffice... Frank, feel free to add these to y… Started by Mark A. Kane in Luthier Talk |
17 |
Nov 16, 2013 Reply by J R Emmett |
Finish Defect on Headstock - Advice NeededThe photos below are of the headstock of a 1993 Les Paul Custom. The owner asked to "improve" its looks. As you can see, along the edges o… Started by Robbie Collins in Luthier Talk |
6 |
Nov 16, 2013 Reply by John |
Santa Cruz Guitar Co. in the newsSaw this in the news: Santa Cruz Guitar Co. turns rare wood into unique sound http://www.sfgate.com/music/article/Santa-Cruz-Guitar-Co-tur… Started by Paul Young in Luthier Talk |
0 | Nov 16, 2013 |
Easiest way to reseat glued frets?Hi all. I was wondering if it's enough to reseat glued in frets that are lifted just by reheating them and then pressing and locking it in… Started by tadej bratkovic in Luthier Talk |
6 |
Nov 15, 2013 Reply by tadej bratkovic |
Sigma guitars, poor man's Martin?Hi all. Again, sorry that this is not a repair/luthier question, but I thought I'd ask: I've been looking at the older Sigma acoustics, the… Started by Arthur Sweeney in Luthier Talk |
6 |
Nov 14, 2013 Reply by Ned Knepp |
© 2025 Created by Frank Ford.
Powered by
