Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Taylor Neck Reset - Stacking Shims?Hello All, I'm working on a Taylor Baby with really high action. There is only one shim on these models under the fretboard tongue (there… Started by Chris Shaltis in Luthier Talk |
10 |
Nov 13, 2019 Reply by Chris Shaltis |
33 Martin 0-17Hi guys , I have 1933 Martin 0-17 on the bench , the owner has just bought it . It seems to have been sprayed with a satin lacquer which sh… Started by Len Biglin in Luthier Talk |
5 |
Nov 12, 2019 Reply by Len Biglin |
What is it?Saw this at our classic all purpose music store, the Folk Shop in Tucson. They’ve had this for a while and it has no label or logo. Clearly… Started by LARRY KLOSE in Luthier Talk |
7 |
Nov 11, 2019 Reply by Todd Reich |
Need bridge thickness for 76 Gibson J-45/50I have acquired a 76 Gibson J-45/50 that I suspect has had the bridge thinned to get the action lower on a guitar that needs a neck re-set.… Started by Paul Breen in Luthier Talk |
3 |
Nov 9, 2019 Reply by Richard Bales |
Brace radius jigMade a jig to give brace blanks a small radius, 30" for the top braces and 20" for the bottom ones, using a toggle clamp, a long plane and… Started by Roger Häggström in Luthier Talk |
4 |
Nov 1, 2019 Reply by Redacted |
The mummified guitar..Well this was what I found when I needed to replace a couple of potentiometers in the old Guild.. Sorry here is the picture :) It's to keep… Started by Claus Holm Jensen in Luthier Talk |
1 |
Oct 28, 2019 Reply by LARRY KLOSE |
shelf-nut on les paulmaking a shelf nut. by the time it's correct, the shelf for the chubby E string will protrude 3mm from the original nut position. is this a… Started by Nick - p in Luthier Talk |
4 |
Oct 28, 2019 Reply by Todd Reich |
Stew Mac heat stick. What length?Going to order a heat stick. I do both deep and shallow body neck resets on occasion. Can I just order the long version and use it on both… Started by J. Ensalaco in Luthier Talk |
3 |
Oct 27, 2019 Reply by Walter W Wright |
String Tension QuestionHello, I have a Guild Starfire 12 string (semi hollowbody, 3 piece laminated neck) that I have recently set up with a few string changes (.… Started by Brian T. Williams in Luthier Talk |
4 |
Oct 22, 2019 Reply by Walter W Wright |
Fret buzz after doing fret jobs lately, Frank, you're the expert on fret work, any ideas?Frank/Folks, I'm about at the end of my rope. After the last several fret jobs i've done, I've been getting buzz on the e a and d strings.… Started by Kevin Swaim in Luthier Talk |
27 |
Oct 21, 2019 Reply by David Kennedy |
© 2026 Created by Frank Ford.
Powered by
